Remove the optical drive

The server supports both DVD-ROM and DVD-RW drives.

1. Do one of the following:
   • For tower models, open and remove the tower bezel.
   • For rack models, if installed, remove the security bezel.
2. Power down the server.
3. Remove all power:
   1. Disconnect each power cord from the power source.
   2. Disconnect each power cord from the server .
4. Do one of the following:
   • For tower models, place the server on a flat, level surface with the access panel facing up.
   • For rack models, extend the server from the rack.
5. Remove the access panel.
6. Remove the air baffle.
7. Remove the optical drive:
   1. Disconnect and remove the optical drive cable.
   2. Remove the screw and lift the carrier.
   3. Remove the optical drive from the drive bay.