Re-entering the server serial number and product ID
After you replace the system board, you must re-enter the server serial number and the product ID:
Procedure
- During the server startup sequence, press the F9 key to access UEFI System Utilities.
- Select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Advanced System ROM Options > Serial Number, and then press the Enter key.
-
Enter the serial number and press the
Enter key.
The following message appears:
The serial number should only be modified by qualified service personnel. This value should always match the serial number located on the chassis.
- To clear the warning, press the Enter key.
- Enter the serial number and press the Enter key.
-
Select
Product ID.
The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service personnel. This value should always match the Product ID located on the chassis.
- Enter the product ID and press the Enter key.
-
To confirm exiting System Utilities, press the
F10
key.
The server automatically reboots.