Powering up the server

The rack initiates an automatic power-up sequence when the server is installed. If the default setting is changed, use one of the following methods to power up the server:

• Use a virtual power button selection through iLO.
• Press and release the Power On/Standby button.

When the server goes from the standby mode to the full power mode, the system power LED changes from amber to solid green. The health status LED light remains solid green when the Power On/Standby Button service is being initialized. For more information about the system power LED status, see "Front panel identification."

For more information about iLO, see "HPE iLO."