Install an internal USB device

Procedure
  1. Power down the server.
  2. Disconnect the power cord from the AC source.
  3. Remove the power adapter cord from the power cord clip, and then disconnect the power adapter from the server.
  4. Disconnect all peripheral cables from the server.
  5. If installed, unlock and remove the security padlock and/or the Kensington security lock.

    For more information, see the lock documentation.

  6. If the server is in a vertical orientation, position the server in a horizontal orientation.

    Positioning the server in a horizontal orientation
  7. Remove the chassis cover.
  8. Plug in the USB device into the internal USB port.

    Installing an internal USB device
  9. Install the chassis cover.
  10. If removed, install the security padlock and/or the Kensington security lock.

    For more information, see the lock documentation.

  11. Connect all peripheral cables to the server.
  12. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clip.
  13. Connect the power cord to the AC source.
  14. Power up the server.

The installation is complete.