Removing the front bezel
To access the drive bays, remove the front bezel.
Procedure
- Power down the server.
- Disconnect the power cord from the AC source.
- Remove the power adapter cord from the power cord clip, and then disconnect the power adapter from the server.
- Disconnect all peripheral cables from the server.
-
If the server is in a vertical orientation, position the server in a horizontal orientation.
-
If the front bezel is locked, do the following:
- Remove the chassis cover.
- Switch the bezel locks upward.
-
To remove an unlocked front bezel, do the following:
- Pivot the bottom part of the bezel upward (callout 1).
- Release the bezel tabs from their chassis openings (callout 2).