Enabling iSCSI Policy (Gen10) or Software Initiator (Gen10 Plus)
Enables or disables the iSCSI Software Initiator. When enabled, the system's iSCSI Software Initiator will be used to access iSCSI targets on any configured NIC ports. When disabled, the system's iSCSI Software Initiator will not attempt to access any configured iSCSI targets.
Procedure
From the
System Utilities screen, select
System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network Boot Options > iSCSI Policy (Gen10) or iSCSI Software Initiator (Gen10 Plus).
Select a setting.
Enabled—Enables the UEFI iSCSI software initiator.
Disabled—Disables the UEFI iSCSI software initiator.
NOTE:
This option only controls whether the iSCSI Software Initiator is
Enabled or
Disabled. To enable iSCSI boot from the adapter initiator, you must enable iSCSI in the adapter firmware and configure it.