Setting Dynamic Power Capping Functionality

Use the Setting Dynamic Power Capping Functionality option to configure when the system ROM executes power calibration during the boot process.

Procedure
  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Boot Time Optimizations > Dynamic Power Capping Functionality.
  2. Select a setting.

    • Auto—Power calibration runs the first time the server is booted and is only run again when the hardware configuration settings of the server change.

    • Enabled—Power calibration runs on every system boot.

    • Disabled—Power calibration does not run, and Dynamic Power Capping is not supported.

  3. Save your setting.