Changing the default Fibre Channel/FCoE scanning policy

Prerequisites

Boot Mode is set to UEFI Mode.

Procedure
  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > Fibre Channel/FCoE Scan Policy and press Enter.
  2. Select a setting and press Enter.
    1. Scan All Targets — Each installed FC/FCoE adapter scans all available targets.

    2. Scan Configured Targets Only — Each installed FC/FCoE adapter only scans targets that are preconfigured in the device settings. This setting overrides any individual device settings configured in the device-specific setup.

  3. Press F10.