Setting the embedded storage boot policy
Prerequisites
Boot Mode is set to UEFI Mode.
Procedure
- From the System Utilities screen, select and press Enter.
- Select a storage controller and press Enter.
-
Select a setting and press
Enter.
- Boot All Targets — All valid boot targets attached to the storage controller are available to the UEFI Boot Order list.
- Boot Limit to 3 Targets — A maximum of three boot targets attached to the storage controller are available to the UEFI Boot Order list.
- Boot No Targets — No boot targets attached to the storage controller are available to the UEFI Boot Order list.
- Press F10.