Configuring an embedded video connection
Procedure
- From the System Utilities screen, select and press Enter.
-
Select a setting and press
Enter.
- Auto—The external video connection to the embedded video controller is automatically disabled to save power when a monitor is not attached. It is enabled automatically when a monitor is attached (including when the server is operating).
- Always Disabled—The external video connection to the embedded video controller is disabled and a monitor connected to this port does not display except during system boot.
- Always Enabled—The external video connection to the embedded video controller is always enabled. This option is only required if a monitor is attached with a monitor detection that does not function, causing Auto mode not to work properly.
- Press F10.