Configuring VLAN Configuration
Procedure
- From the System Utilities screen, select and press Enter.
-
Complete the following and press
Enter after each selection or data entry.
- VLAN Control—Select Enabled to enable VLAN tagging on all enabled network interfaces. This setting is disabled by default.
- VLAN ID—When VLAN Control is enabled, enter a global VLAN ID of 0 to 4094 for all enabled network interfaces.
- VLAN Priority—WhenVLAN Control is enabled, enter a priority value of 0 to 7 for VLAN tagged frames.
- Press F10.