sysconfig attributes

You can view all current possible sysconfig attribute names, descriptions, current and possible values, and Enum setting types. The following example shows a portion of possible command output.

NOTE:

Output for the sysconfig command varies by server model. 


Setting Name    = EmbeddedSerialPort          [Embedded Serial Port]
Current Value   = Com1Irq4                    [COM 1; IRQ4; I/O: 3F8h-3FFh]
Possible Values = Com1Irq4                    [COM 1; IRQ4; I/O: 3F8h-3FFh]
                  Com2Irq3                    [COM 2; IRQ3; I/O: 2F8h-2FFh]
                  Disabled                    [Disabled]
Setting Type    = Enum

Setting Name    = VirtualSerialPort           [Virtual Serial Port]
Current Value   = Com2Irq3                    [COM 2; IRQ3; I/O: 2F8h-2FFh]
Possible Values = Com1Irq4                    [COM 1; IRQ4; I/O: 3F8h-3FFh]
                  Com2Irq3                    [COM 2; IRQ3; I/O: 2F8h-2FFh]
                  Disabled                    [Disabled]
Setting Type    = Enum

Setting Name    = NicBoot1                    [Embedded LOM 1 Port 1]
Current Value   = NetworkBoot                 [Network Boot]
Possible Values = NetworkBoot                 [Network Boot]
                  Disabled                    [Disabled]
Setting Type    = Enum

Setting Name    = PreBootNetwork           [Pre-Boot Network Interface]
Current Value   = Auto                     [Auto]
Possible Values = Auto                     [Auto]
                  EmbNicPort1              [Embedded LOM 1 Port 1 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  EmbNicPort2              [Embedded LOM 1 Port 2 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  EmbNicPort3              [Embedded LOM 1 Port 3 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  EmbNicPort4              [Embedded LOM 1 Port 4 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  FlexLom1Port1            [Embedded FlexibleLOM 1 Port 1 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  FlexLom1Port2            [Embedded FlexibleLOM 1 Port 2 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  FlexLom1Port3            [Embedded FlexibleLOM 1 Port 3 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  FlexLom1Port4            [Embedded FlexibleLOM 1 Port 4 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  Slot1NicPort1            [Slot 1 Port 1 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  Slot1NicPort2            [Slot 1 Port 2 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  Slot1NicPort3            [Slot 1 Port 3 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
                  Slot1NicPort4            [Slot 1 Port 4 : HPE Ethernet 1Gb 4-port xxx Adapter - NIC]
Setting Type    = Enum


Setting Name    = Dhcpv4                      [DHCPv4]
Current Value   = Enabled                     [Enabled]
Possible Values = Disabled                    [Disabled]
                  Enabled                     [Enabled]
Setting Type    = Enum