Event Identifiers 3072-3876

Event identifier: cpqhsmsg.dll - 3072 (Hex)0x84350c00 (Service Event)

Log Severity: Warning (2)

Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3073 (Hex)0x84350c01 (Service Event)

Log Severity: Warning (2)

Log Message: Could not create the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3074 (Hex)0x84350c02 (Service Event)

Log Severity: Warning (2)

Log Message: Could not create the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3075 (Hex)0x84350c03 (Service Event)

Log Severity: Warning (2)

Log Message: Unable to read “%1” from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3076 (Hex)0x84350c04 (Service Event)

Log Severity: Warning (2)

Log Message: Unable to read “%1” from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3084 (Hex)0xc4350c0c (Service Event)

Log Severity: Error (3)

Log Message: Unable to read configuration (%1) from the registry. This error can be caused by a corrupt registry, a low memory condition, or incomplete configuration. Reconfigure the Management Agents using the control panel. Rebooting the server may also correct this error.

Event identifier: cpqhsmsg.dll - 3085 (Hex)0x84350c0d (Service Event)

Log Severity: Warning (2)

Log Message: Unable to write (%1) to the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3086 (Hex)0x84350c0e (Service Event)

Log Severity: Warning (2)

Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file. Reinstalling the Management Agents or running the Emergency Repair procedure may correct this error.

Event identifier: cpqhsmsg.dll - 3090 (Hex)0x84350c12 (Service Event)

Log Severity: Warning (2)

Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will correct this error.

Event identifier: cpqhsmsg.dll - 3840 (Hex)0x84350f00 (Service Event)

Log Severity: Warning (2)

Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will correct this error.

Event identifier: cpqhsmsg.dll - 3841 (Hex)0x84350f01 (Service Event)

Log Severity: Warning (2)

Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3842 (Hex)0x84350f02 (Service Event)

Log Severity: Warning (2)

Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3843 (Hex)0x84350f03 (Service Event)

Log Severity: Warning (2)

Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3844 (Hex)0x84350f04 (Service Event)

Log Severity: Warning (2)

Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3845 (Hex)0x84350f05 (Service Event)

Log Severity: Warning (2)

Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3855 (Hex)0x84350f0f (Service Event)

Log Severity: Warning (2)

Log Message: Could not open a cluster enumeration object. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3856 (Hex)0x84350f10 (Service Event)

Log Severity: Warning (2)

Log Message: Could not enumerate all of the nodes in the cluster. The data contains the error code.

Event identifier: cpqhsmsg.dll - 3857 (Hex)0x84350f11 (Service Event)

Log Severity: Warning (2)

Log Message: Could not get the cluster's status. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3858 (Hex)0x84350f12 (Service Event)

Log Severity: Warning (2)

Log Message: Could not open the enumerated resource. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3859 (Hex)0x84350f13 (Service Event)

Log Severity: Warning (2)

Log Message: Could not enumerate the cluster's resources. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3860 (Hex)0x44350f14 (Service Event)

Log Severity: Information (1)

Log Message: Resource status is online.

Event identifier: cpqhsmsg.dll - 3861 (Hex)0x44350f15 (Service Event)

Log Severity: Information (1)

Log Message: Resource status is offline. The resource has failed or was taken offline by a cluster administrator.

Event identifier: cpqhsmsg.dll - 3862 (Hex)0x44350f16 (Service Event)

Log Severity: Information (1)

Log Message: Could not get the resource status. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3863 (Hex)0x44350f17 (Service Event)

Log Severity: Information (1)

Log Message: Resource status is inherited.

Event identifier: cpqhsmsg.dll - 3864 (Hex)0x44350f18 (Service Event)

Log Severity: Information (1)

Log Message: Resource status is initializing. The Cluster service is starting.

Event identifier: cpqhsmsg.dll - 3865 (Hex)0x44350f19 (Service Event)

Log Severity: Information (1)

Log Message: Resource status is pending. The Cluster service is starting or the resource is being put back online or being taken offline.

Event identifier: cpqhsmsg.dll - 3866 (Hex)0x44350f1a (Service Event)

Log Severity: Information (1)

Log Message: Resource status is online pending. The resource is being put back online.

Event identifier: cpqhsmsg.dll - 3867 (Hex)0x44350f1b (Service Event)

Log Severity: Information (1)

Log Message: Resource status is offline pending. The resource is being taken offline.

Event identifier: cpqhsmsg.dll - 3868 (Hex)0x84350f1c (Service Event)

Log Severity: Warning (2)

Log Message: Cluster information is unavailable. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3869 (Hex)0x84350f1d (Service Event)

Log Severity: Warning (2)

Log Message: The Cluster service is not running. The Cluster service has failed or has not started yet. Try to restart the cluster service.

Event identifier: cpqhsmsg.dll - 3870 (Hex)0x84350f1e (Service Event)

Log Severity: Warning (2)

Log Message: The Agent could not open the Cluster service. The Cluster service may have been stopped. Try to restart the cluster service.

Event identifier: cpqhsmsg.dll - 3871 (Hex)0x84350f1f (Service Event)

Log Severity: Warning (2)

Log Message: The Agent could not open the Cluster service registry key.

Event identifier: cpqhsmsg.dll - 3872 (Hex)0x84350f20 (Service Event)

Log Severity: Warning (2)

Log Message: The specified storage class is not supported by the Agent. The Agent only supports the disk resource class.

Event identifier: cpqhsmsg.dll - 3873 (Hex)0x84350f21 (Service Event)

Log Severity: Warning (2)

Log Message: The fibre controller resided at the storage box is off-line. The Agent only supports the disk resource class.

Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event)

Log Severity: Warning (2)

Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.

Event identifier: cpqhsmsg.dll - 3875 (Hex)0x84350f23 (Service Event)

Log Severity: Warning (2)

Log Message: Could not open enumerated network. The Cluster service may not be running. Try to restart the Cluster service.

Event identifier: cpqhsmsg.dll - 3876 (Hex)0x84350f24 (Service Event)

Log Severity: Warning (2)

Log Message: Could not enumerate the cluster's networks. The Cluster service may not be running. Try to restart the Cluster service.