162-System options error

Symptom

162-System options not set.

Cause
  • The configuration is incorrect.
  • The system configuration has changed after the last boot (for example, the addition of a hard drive).
  • A loss of power to the real-time clock has occurred (the real-time clock loses power if the onboard battery is not functioning correctly).
Action
  1. Press the F1 key to enter UEFI System Utilities.
  2. Run the server setup utility to change the configuration.

    For more information, see "UEFI System Utilities" in the HPE ProLiant Gen9 Troubleshooting Guide, Volume I on the Hewlett Packard Enterprise website.

  3. If the issue persists, replace the onboard battery.

    For more information, see the server maintenance and service guide on the Hewlett Packard Enterprise website.