RIBCL messages

The following table lists the error messages displayed when using the RIBCL XML scripting language.

Status number Error message
0x0000 No error.
0x0001 Syntax error.
0x0002 This user is not logged in.
0x0003 Login name is too long.
0x0004 Password is too short.
0x0005 Password is too long.
0x0006 User table is full. No room for new user.
0x0007 Cannot add user. The login/ user name already exists.
0x0008 Cannot modify user. The login/ user name already exists.
0x0009 Cannot delete user information for currently logged user.
0x000A User login name was not found.
0x000B User information is open for read-only access. Write access is required for this operation.
0x000C Server information is open for read-only access. Write access is required for this operation.
0x000D iLO information is open for read-only access. Write access is required for this operation.
0x000E Rack information is open for read-only access. Write access is required for this operation.
0x000F Directory information is open for read-only access. Write access is required for this operation.
0x0010 Internal error. Unknown RIB action.
0x0011 Internal error. Unknown SERVER action.
0x0012 Virtual Power Button feature is not supported or not enabled on this server.
0x0013 Virtual Power Button cable is attached.
0x0014 Virtual Power Button cable is either not attached or not supported.
0x0015 The IP address specified is not valid.
0x0016 The firmware image file is not valid.
0x0017 A valid firmware image has not been loaded.
0x0018 The flash process could not be started.
0x0019 The Remote Insight Board Firmware is being updated. The board will be reset after the operation.
0x001A The Remote Insight Board is being reset.
0x001B The server is being reset.
0x001C The Integrated Lights-Out Event Log is being cleared.
0x001D No image present in the Virtual Floppy drive.
0x001E An invalid virtual floppy option has been given.
0x001F Failed to allocate virtual floppy image space.
0x0020 The Virtual Floppy image is invalid.
0x0021 The key parameter specified is not valid.
0x0022 The SESSION TIMEOUT value specified is greater the maximum value allowed, 120.
0x0023 User does NOT have correct privilege for action. ADMIN_PRIV required.
0x0024 User does NOT have correct privilege for action. RESET_SERVER_PRIV required.
0x0025 User does NOT have correct privilege for action. UPDATE_ILO_PRIV required.
0x0026 User does NOT have correct privilege for action. CONFIG_ILO_PRIV required.
0x0027 User does NOT have correct privilege for action. CLEAR_LOGS_PRIV required.
0x0028 User does NOT have correct privilege for action. CONFIG_RACK_PRIV required.
0x0029 User does NOT have correct privilege for action. VIRTUAL_MEDIA_PRIV required.
0x002A Server is NOT a rack server; Rack commands do not apply.
0x002B Minimum password length value exceeded.
0x002C Unable to allocate memory for parser.
0x002D Unable to allocate memory from memory pool.
0x002E License key error.
0x002F License is already active.
0x0030 Login is currently being delayed.
0x0031 A firmware update is already in progress.
0x0032 LENGTH does not match post-translated length of VALUE.
0x0033 Problem manipulating EV.
0x0034 Cannot disable both LDAP and user account.
0x0035 An invalid Virtual Media option has been given.
0x0036 Unable to parse Virtual Media URL.
0x0037 Virtual Media URL is not accessible.
0x0038 Virtual Media already connected via applet.
0x0039 No image present in the Virtual Media drive.
0x003A Virtual Media already connected via script. Must EJECT/DISCONNECT before inserting new media.
0x003B Unrecognized keyboard model.
0x003C Feature not supported.
0x003D IP Range is invalid.
0x003E Error writing configuration.
0x003F Domain Name is too long.
0x0040 Error reading certificate.
0x0041 Invalid certificate common name.
0x0042 Certificate signature does not match private key.
0x0043 This feature requires an installed license key.
0x0044 This setting can not be changed while virtual media is connected.
0x0045 This setting can not be changed while remote console is connected.
0x0046 This setting can not be changed while Two-Factor authentication is enabled.
0x0047 This setting can not be changed while Shared Network port is enabled"
0x0048 The Virtual Media image is invalid.
0x0049 This setting can not be enabled unless a trusted CA certificate has been imported.
0x004A The value specified is invalid.
0x004B No data available.
0x004C Power management is disabled.
0x004D Feature not supported.
0x004E Unable to import the SIM certificate from the specified source.
0x004F Insufficient room to add a SIM Server record.
0x0050 Single Sign-On information is open for read-only access. Write access is required for this operation.
0x0051 The COMPUTER_LOCK value must be "custom" to use the tag COMPUTER_LOCK_KEY.
0x0052 Invalid COMPUTER_LOCK option; value must be "windows", "custom", "disabled", or "".
0x0053 COMPUTER_LOCK_KEY tag is missing; programmable key sequence did not change.
0x0054 Command without TOGGLE="Yes" attribute is ignored when host power is off.
0x0055 Duplicate record exists.
0x0056 Premature operation refused.
0x0057 SSH key was not found.
0x0058 There is no user name or the user name appended to SSH key does not exist.
0x0059 SSH key is too large for storage space.
0x005A No available slot for additional SSH key.
0x005B A Trusted Platform Module (TPM) has been detected in this system. TPM_ENABLED needs to be set to "Yes" in order to perform firmware update.
0x005C Firmware image is not available or not valid.
0x005D Firmware flash failed.
0x005E Open flash part failed.
0x005F Login failed.
0x0060 RIBCL parser is busy. Retry later.
0x0061 RIBCL parser is not active. No output is being generated.
0x0062 VLAN configuration is available on Shared Network Port(SNP) only. Either modify this script to enable SNP or do it manually.
0x0063 Changing link configuration is NOT allowed for Shared Network Port(SNP). Avoid options: SPEED_AUTOSELECT, NIC_SPEED and/or FULL_DUPLEX.
0x0064 Chosen Interface is not set to be enabled, thus no change in configuration. ENABLE_NIC needs to be set to "Yes" to proceed.
0x0065 Invalid VLAN ID. Valid Range is: 1 to 4094, both inclusive.
0x0066 Power capping is handled by Onboard Administrator.
0x0067 Power capping information is not available.
0x0068 Duplicate of existing SSH key.
0x0069 Invalid SSH key data.
0x006A User data error, please retry.
0x006B iLO has been automatically configured for Flex-10 mode therefore NIC configuration is not allowed.
0x006C This command cannot be run from this account.
0x006D The iLO is not configured for this command.
0x006E iLO may not be disabled on this server.
0x006F Keytab Error, Keytab not properly encoded.
0x0070 Could not set the Default Language.
0x0071 Could not get the Default Language.
0x0072 Single sign on server index could not be found.
0x0073 Could not get the current timezone.
0x0074 Could not find the timezone selected.
0x0082 eRS - Only one connect model can be selected.
0x0083 eRS - Missing required parameter for direct connect model setup.
0x0084 eRS - Missing required parameter for IRS connect model setup.
0x0085 eRS - No connect model specified.
0x0086 There are missing parameters in the xml script.
0x0087

Either SNMP Pass-through OR Embedded Health must be enabled.

One of these tags, AGENTLESS_MANAGEMENT_ENABLE, or SNMP_PASSTHROUGH_STATUS must be set to “yes” and the other tag set to “no.”

0x0088 The iLO subsystem is currently generating a Certificate Signing Request(CSR), run script after 10 minutes or more to receive the CSR.
0x0089 Power capping information is not available at this time, try again later.
0x008A Failed to import the certificate.
0x008B Unknown error.
0x008C Problem reading the EV.
0x008D There is no EV by the name given.
0x008E User does NOT have correct privilege for action. REMOTE_CONS_PRIV required.
0x008F Error reading configuration
0x0090 Unable to clear the SSH key.
0x0091 The system is configured incorrectly for this feature.
0x0092 An invalid data error occurred, a single system reboot may clear this error.
0x0093 An internal comm error occurred.
0x0094 An internal communication error occurred.
0x0095 A timeout occurred, please try again.
0x0096 Busy, please retry.
0x0097 A single system reboot is required.
0x0098 Power capping is not available at this time, try a single system reboot.
0x99 Power capping has been disabled in the ROM by the user.
0XA0 Incorrect URL.
0XA1 Failed to connect to the URL.
0XA3 Failed to update the hot key.
0XA4 Invalid number of keystrokes.
0XA5 Unable to get the hot keys.
0XA6 Demo license previously installed.
0XA7 Some parameters are defined that are not to be specified together.
0XA8 The AHS Log can not be cleared when AHS logging is disabled.
0XA9 Error updating the group.
0XAA The Group SID is not valid.
0XAB Error adding group.
0XAC Error setting group privilege.
0XAD Error while reading or writing SNMP data.
0XAF Error uninstalling the language.
0XB0 This feature requires an advanced license key.
0XB1 There was an error on reading the data.
0XB2 There was an error on setting the data.
0XB3 Invalid port.
0XB4 Port assignments must be unique.