Operational log messages

Log type: LOG_EMERG, Failure type: SW

OA: Internal System Firmware Error. Rebooting.

Log type: LOG_WARNING, Failure type: SW

FWSync: OA firmware sync failed to create firmware image from the Active Onboard Administrator

FWSync: OA firmware sync failed to create firmware image from the Standby Onboard Administrator

FWSync: OA firmware sync of the Active Onboard Administrator failed

FWSync: OA firmware sync of the Standby Onboard Administrator failed

OA: Active Onboard Administrator will not be flashed

OA: Consider resetting the Standby and/or Active Onboard Administrators and retrying

OA: Failed flashing Standby Onboard Administrator

OA: Failed to copy firmware image to the Standby Onboard Administrator

OA: Failed to register for events on the Standby Onboard Administrator(error=0x[value])

OA: Failed to send URB message to configured endpoint. Check URB settings.

OA: Firmware image corrupt. Please verify the image and retry

OA: Please inspect the system log on the Standby Onboard Administrator for further details

OA: The Active and Standby Onboard Administrators may not be communicating reliably

OA: The Onboard Administrator in bay %d has been reset via e-fuse by user [value].

OA: LDAP Server Timed Out.

Log type: LOG_WARNING, Failure type: Info

FWSync: OA firmware sync initiated by user [value:username]

FWSync: Other (STANDBY) OA will be upgraded to firmware [value:versionNumber]

FWSync: This (ACTIVE) OA will be upgraded to firmware [value:versionNumber]

OA: Flashing Active Onboard Administrator. Initiated by user [value:username]

OA: Flashing Standby Onboard Administrator. Initiated by user [value:username]

Log type: LOG_CRIT, Failure type: SW

OA: Enclosure Name change failed.

OA: Failed NVRAM commit of Enclosure Dynamic Power Cap bay opt out list by [value:username].

OA: Failed to reset the Onboard Administrator.

OA: Rack Name change failed

Log type: LOG_CRIT, Failure type: Info

Log cleared by [value:username].

OA: CA certificate (issuer = [value:issuer-CN]) installed by user [value:username].

OA: CA certificate (issuer = [value:issuer-CN]) removed by user [value:username].

OA: Certificate for user [value:username] installed by user [value:username].

OA: Certificate for user [value:username] removed by user [value:username]. All web sessions (if any) were ended.

OA: Certificate owner field set to ([SAN/SUBJECT]) on Onboard Administrator by user [value:username].

OA: Certificate Revocation check [enabled/disabled] on Onboard Administrator by user [value:username].

OA: Downloaded SIM certificate by user [value:username]

OA: Enclosure Dynamic Power Cap bay opt out list set to [value] by [value:username].

OA: Enclosure Dynamic Power Cap set to: [value], derated circuit [value], rated circuit [value] by [value:username].

OA: Enclosure Dynamic Power Cap set to: OFF by [value:username].

OA: Enclosure part number changed from '[value]' to '[value]' by [value:username].

OA: Enclosure PDU type changed from '[value]' to '[value]' by [value:username].

OA: Forced takeover requested by user [value:username].

OA: SSO certificate [value:subject-CN] added by user [value:username].

OA: SSO certificate [value] removed by user [value:username].

OA: LDAP Directory Server certificate(MD5=[value]) installed by user [value:username].

OA: LDAP Directory Server certificate(MD5=[value]) removed by user [value:username].

OA: Onboard Administrator [value:bayNumber] name change failed.

OA: Resetting the Onboard Administrator because two-factor authentication configuration has changed.

OA: Self signed certificate generated and installed by user [value:username].

OA: Time changed by [value:username].

OA: Time zone changed by [value:username].

OA: Time zone changed from [value] to [value]

OA: Time zone changed to [value]

OA: Two Factor Authentication [enabled/disabled] on Onboard Administrator by user [value:username].

Log type: LOG_NOTICE, Failure type: SW

FWSync: Sync failed because the Active and Standby OAs do not have the same hardware version.

OA: unable to run [value:mount]

OA: Warning: Unable to ping the remote oa_syslog server [value:Address]

Log type: LOG_NOTICE, Failure type: Info

FWSync: OA firmware sync to [value:versionNumber] complete

OA: [value:protocol] was [enabled/disabled] by user [value:username]

OA: Alertmail domain changed to [value:mailDomain] by user [value:username]

OA: Alertmail recipient changed to [value] by user [value:username]

OA: Alertmail server changed to [value:mailServer] by user [value:username]

OA: Default VLAN ID for enclosure changed to [value]

OA: DHCPv6 was [enabled/disabled] by user [value:username].

OA: EBIPA Interconnect DNS [value:bladeNumber] [value] [value] by user [value:username]

OA: EBIPA Interconnect Domain [value] [value] by user [value:username]

OA: EBIPA Interconnect domain for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect first DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect first NTP IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect gateway for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect IP Address [value] [value] for bay #[value:bladeNumber] by user [value:username]

OA: EBIPA Interconnect IP Gateway [value] [value] by user [value:username]

OA: EBIPA Interconnect IP Net Mask [value] [value] by user [value:username]

OA: EBIPA Interconnect netmask for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect NTP [value:bladeNumber] [value] [value] by user [value:username]

OA: EBIPA Interconnect second DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect second NTP IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Interconnect third DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server DNS [value:bladeNumber] [value] [value] by user [value:username]

OA: EBIPA Server Domain [value] [value] by user [value:username]

OA: EBIPA Server domain for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server first DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server gateway for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server IP Address [value] [value] for bay #[value:bladeNumber] by user [value:username]

OA: EBIPA Server IP Gateway [value] [value] by user [value:username]

OA: EBIPA Server IP Net Mask [value] [value] by user [value:username]

OA: EBIPA Server netmask for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server NTP [value:bladeNumber] [value] [value] by user [value:username]

OA: EBIPA Server second DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA Server third DNS IP for bay [value:bladeNumber] set to [value] by user [value:username]

OA: EBIPA was [disabled/enabled] for device bay #[value:bladeNumber] by user [value:username]

OA: EBIPA was [disabled/enabled] for interconnect bay #[value:bladeNumber] by user [value:username]

OA: EBIPAv6 Server IP Address for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 was [value] for bay [value:bayNumber] by user [value:username].

OA: EBIPAv6 Server domain for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Server first DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Server second DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Server third DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Interconnect IP Address for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 was [value] for Interconnect bay [value:bayNumber] by user [value:username].

OA: EBIPAv6 Inteconnect domain for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Interconnect first DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Interconnect second DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: EBIPAv6 Interconnect third DNS IP for bay [value:bayNumber] set to [value] by user [value:username].

OA: Enclosure Name was changed to [value:Enclosure Name] by user [value:username]

OA: ENCRYPTION changed to [value:mode] by user [value:username].

OA: Error: iLO Select license is not in place for this Single Sign-on attempt by the LDAP authenticated user

OA: Factory defaults restored by [value]

OA: Firmware management interconnect bays to include have been changed

OA: Firmware management iso URL set to [value:URL]

OA: Firmware management Onboard Administrator bays to include have been changed

OA: Firmware management policy set to auto discover

OA: Firmware management policy set to auto update

OA: Firmware management policy set to manual

OA: Firmware management scheduled update disabled

OA: Firmware management scheduled update time set to [value:date] [value:time]

OA: Firmware management server bays to include have been changed

OA: Firmware management was [enabled/disabled] by user [value:username].

OA: Could not factory reset firmware management log: [value:error] (Code: [value:number])

OA: Group [value:groupname] was added.

OA: Group [value:groupname] was deleted.

OA: Group [value:username] description was set to [value:description].

OA: SIM Trust Mode changed to [value] by user [value:username].

OA: IPv6 address [value:address] added by user [value:username].

OA: IPv6 address [value:address] removed by user [value:username].

OA: IPv6 protocol was disabled by user [value:username].

OA: IPv6 protocol was enabled by user [value:username].

OA: IPv6 Router Advertisement was [enabled/disabled] by user [value:username].

OA: User[value:username] successfully removed the [value:name] language pack.

OA: User [value:username] successfully installed language pack [value:name].

OA: Unable to download language pack from the url provided. Supported protocols are http, https, tftp and ftp.

OA: LDAP authentication was [Disabled/Enabled] by user [value:username].

OA: LDAP group "[value:groupName]" was added by user [value:username].

OA: LDAP group "[value]" was deleted by user [value:username].

OA: LDAP group [value:groupName]'s description changed to [value] by user [value:username].

OA: LDAP group [value] privilege level was changed from [value:Administrator/Operator/User/Anonymous] to [value:Administrator/Operator/User/Anonymous] by user [value:username].

OA: LDAP NT name mapping was [Disabled/Enabled] by user [value:username].

OA: LDAP search context [value:number] was changed to [value] by user [value:username].

OA: LDAP search context [value:number] was cleared by user [value:username].

OA: LDAP server address was changed from [value:ipaddress] to [value:ipaddress] by user [value:username].

OA: LDAP server SSL port was changed to [value:port] by user [value:username].

OA: Link Loss Failover interval set to [value] seconds by user [value:username].

OA: Local user authentication was [Disabled/Enabled] by user [value:username].

OA: Name of Onboard Administrator [value:bayNumber] was changed to [value:username].

OA: Network Interface link forced to [value:speed]Mbps - Full Duplex by user [value:username].

OA: Network Interface link forced to [value:speed]Mbps - Half Duplex by user [value:username].

OA: Network Interface link set to Auto negotiation by user [value:username].

OA: New SSH key installed by user [value:username]

OA: Nothing needs to be reverted as VLAN setting has not changed

OA: Polling Interval of NTP set to [value] seconds by user [value:username].

OA: PowerDelay has been initiated for the selected devices.

OA: PowerDelay has completed for the selected devices.

OA: PowerDelay interconnect settings have been changed by user [value:username].

OA: PowerDelay server settings have been changed by user [value:username].

OA: Primary NTP server was set to [value:ntp] by user [value:username].

OA: Protocol http was [enabled/disabled] by user [value:username]

OA: Protocol SSH was [enabled/disabled] by user [value:username]

OA: Protocol Telnet was [enabled/disabled] by user [value:username]

OA: Protocol XML was [enabled/disabled] by user [value:username]

OA: Rack Name was changed to [value] by user [value:username]

OA: Remote syslog test message.

OA: Remote system log address set to [value:Address]

OA: Remote system log port set to [value:port]

OA: Remote system logging enabled to server [value:Address], port [value:port]

OA: Remote system logging was disabled.

OA: Saving VLAN IPCONFIG changes

OA: Secondary NTP server was set to [value:ntp] by user [value:username].

OA: Secure Shell authorized key file added by [value]

OA: Secure Shell authorized key file cleared by [value]

OA: SNMP Contact set to [value] by user [value:username].

OA: SNMP Location set to [value] by user [value:username].

OA: SNMP ReadOnly community string set to [value] by user [value:username].

OA: SNMP ReadWrite community string set to [value] by user [value:username].

OA: Static TCP/IP settings was modified by user [value:username].

OA: TCP/IP settings was set to DHCP - DynamicDNS by user [value:username].

OA: TCP/IP settings was set to DHCP by user [value:username].

OA: Tcp timeout set to [value:number] minutes.

OA: Trap Receiver [value:address] was added by user [value:username].

OA: Trap Receiver [value:address] was also added as alternative for IPv6 host.

OA: Trap Receiver [value:address] was deleted by user [value:username].

OA: Trusted Host [value:address] was added by user [value:username].

OA: Trusted Host [value:address] was deleted by user [value:username].

OA: Undoing VLAN IPCONFIG changes. IP mode is set to DHCP for OA #[value:number]

OA: Undoing VLAN IPCONFIG changes. IP mode is set to STATIC for OA #[value:number]

OA: USB enable changed to [value]. Rebooting...

OA: User [value:username] privilege level was changed from [value:Administrator/Operator/User/Anonymous] to [value:Administrator/Operator/User/Anonymous] by user [value:username]. All web and CLI sessions (if any) were ended.

OA: User [value:username] was added by user [value:username].

OA: User [value:username] was assigned to group [value:groupname].

OA: User [value:username] was deleted by user [value:username].

OA: User [value:username] was disabled by user [value:username]. All web and CLI sessions (if any) were ended.

OA: User [value:username] was enabled by user [value:username].

OA: User [value:username] was removed from group [value:groupname].

OA: User [value:username]'s contact was set removed by user [value:username].

OA: User [value:username]'s contact was set to [value] by user [value:username].

OA: User [value:username]'s full name was removed by user [value:username].

OA: User [value:username]'s full name was set to [value:fullname] by user [value:username].

OA: VLAN IPCONFIG set to DHCP IP mode and VLAN ID [value] for OA #[value:number]

OA: VLAN IPCONFIG set to STATIC IP mode and VLAN ID [VALUE] for OA #[value:number]

OA: VLAN setting has been restored to factory defaults

OA: VLAN setting has been reverted back to saved FLASH config data

OA: VLAN will be reverted to saved config data in [value] secs

OA: Removing VLAN [value:name] ID [value:number].

OA: Removing unnamed VLAN ID [value:number].

OA: Adding VLAN [value:name] ID [value:number].

OA: Adding unnamed VLAN ID [value:number].

OA: Changing VLAN ID [value:number] name to [value:name]

OA: Deleting VLAN ID [value:name].

OA: Waiting DHCPv4 server response.

Log type: LOG_INFO, Failure type: SW

OA: ERROR: Event [value] with location [value] sent

Log type: LOG_INFO, Failure type: Info

OA: Blade #[value:bladeNumber] boot order settings changed by user [value:username].

OA: Blade #[value:bladeNumber] boot order settings changed by user [value:username]. First Boot Device: [value]. Boot Agent: [value].

OA: Blade [value:bladeNumber] DVD connection changed by user [value:username] to '[value:URL]'.

OA: Cold Boot virtual command enacted on blade[value:bladeNumber] by user [value:username].

OA: Interconnect module [value:number] has been reset by user [value:username].

OA: Momentary Press virtual command enacted on blade [value:bladeNumber] by user [value:username].

OA: Onboard Administrator in bay [value:bayNumber] was restarted by user [value:username].

OA: Power limit was set to [value] by user [value:username]

OA: Power savings mode was set to [ON/OFF] by user [value:username]

OA: Power subsystem redundancy mode was set to [value] by user [value:username]

OA: Press and Hold virtual command enacted on blade [value:bladeNumber] by user [value:username].

OA: Reboot virtual command enacted on blade [value:bladeNumber] by user [value:username].

OA: Session on interconnect [value:bayNumber] cleared by [value]

OA: Standby Onboard Administrator flashed successfully

OA: Virtual power command enacted on interconnect [value:number] by user [value:username]

OA: Warning: Not all VC-Enet modules are on the same VLAN ID

Log type: LOG_ERR, Failure type: Info

OA: Not possible to get the actual VC Mode of the enclosure.