Event Identifiers 1539-3352
Event identifier: cpqsvmsg.dll - 1539 (Hex)0xc4350603 (Service Event)
Log Severity: Error (3)
Log Message: Unable to write to the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1540 (Hex)0xc4350604 (Service Event)
Log Severity: Error (3)
Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1543 (Hex)0xc4350607 (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required driver. This error can be caused by a corrupt or missing file. Reinstalling the Server Agents, the software support drivers, or running the Emergency Repair procedure may correct this error.
Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1574 (Hex)0xc4350626 (Service Event)
Log Severity: Error (3)
Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The Server SNMP Agent is unable to generate traps due to an error during initialization.
Event identifier: cpqsvmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Log Message: The SNMP Agent is older than other components. The SNMP Agent is older than the other components of the Server Agents. Reinstall the entire Server Agents package to correct this error.
Event identifier: cpqsvmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other components of the Server Agents. Reinstall the entire Server Agents package to correct this error.
Event identifier: cpqsvmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqsvmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file. Reinstalling the Server Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqsvmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Server Agent service is not running. The Server SNMP Agent has determined that the Server Agent service is not running. Stop the SNMP service and restart the Server Agents service. If the error persists, reinstalling the Server Agents may correct this error.
Event identifier: cpqsvmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Management Agent control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access configuration. If this error persists, reinstalling the Server Agents or the Remote Access Service may correct this error. For more information, see the Asynchronous Management documentation.
Event identifier: cpqsvmsg.dll - 3328 (Hex)0x84350d00 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system may correct this error.
Event identifier: cpqsvmsg.dll - 3329 (Hex)0x84350d01 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3330 (Hex)0x84350d02 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3331 (Hex)0x84350d03 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3332 (Hex)0x84350d04 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3333 (Hex)0x84350d05 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3342 (Hex)0x84350d0e (Service Event)
Log Severity: Warning (2)
Log Message: The Remote Insight Agent got an unexpected error code while waiting for multiple events. The data contains the error code.
Event identifier: cpqsvmsg.dll - 3345 (Hex)0x84350d11 (Service Event)
Log Severity: Warning (2)
Log Message: Remote Insight Board device driver not present. The Remote Insight Agent requires the Remote Insight Board device driver (CPQSM2.SYS) to be installed. Install the driver from the latest Software Support for Windows. If you do not have a Remote Insight Board in this system, disable the Remote Insight Agent via the Management Agents Control Panel.
Event identifier: cpqsvmsg.dll - 3351 (Hex)0x84350d17 (Service Event)
Log Severity: Warning (2)
Log Message: The shared memory interface has been reset.
Event identifier: cpqsvmsg.dll - 3352 (Hex)0xc4350d18 (Service Event)
Log Severity: Error (3)
Log Message: The Remote Insight board has been reset.