1733-Slot # Drive Array – Storage Enclosure Firmware Upgrade Problem Detected

Symptom

1733-Slot # Drive Array – Storage Enclosure Firmware Upgrade Problem Detected. Port # Box #

(Followed by one of the following:)

  • Enclosure firmware upgrade needed - run Flash Components.
  • Unable to read firmware version of one or more components.
Cause

  • An incorrect enclosure firmware version is installed.

  • An enclosure firmware upgrade is needed.

  • An enclosure component has failed.

Action
  1. Upgrade the enclosure firmware and the controller firmware.
    For more information, see "Firmware updates" in the HPE ProLiant Gen9 Troubleshooting Guide, Volume I on the Hewlett Packard Enterprise website.
  2. If the issue persists, replace the affected enclosure components.