Event Identifiers 300-1293

Event identifier: cpqnimsg.dll - 300 (Hex)0x8435012c (Service Event)

Log Severity: Warning (2)

Log Message: The WBEM query was cancelled by WMI. The query was issued again.

Cause: WMI service was probably restarted.

Event identifier: cpqnimsg.dll - 1024 (Hex)0x84350400 (Service Event)

Log Severity: Warning (2)

Log Message: The SNMP Insight Agent is unable to generate traps due to an error during initialization.

Cause: Check to Be sure that the SNMP service is running. Reinstalling the agents may fix this error.

Event identifier: cpqnimsg.dll - 1025 (Hex)0x84350401 (Service Event)

Log Severity: Warning (2)

Log Message: The NIC SNMP Management Agent's trap thread has encountered an error while waiting for event notification from event log.

Event identifier: cpqnimsg.dll - 1027 (Hex)0x84350403 (Service Event)

Log Severity: Warning (2)

Log Message: The SNMP Agent is older than other components. The SNMP Agent is older than the other components of the Insight Agents. Reinstall the entire Insight Agents package to correct this error.

Event identifier: cpqnimsg.dll - 1028 (Hex)0x84350404 (Service Event)

Log Severity: Warning (2)

Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other components of the Insight Agents. Reinstall the entire Insight Agents package to correct this error.

Event identifier: cpqnimsg.dll - 1029 (Hex)0x84350405 (Service Event)

Log Severity: Warning (2)

Log Message: The NIC SNMP Management Agent has failed to refresh data associated with key %1. Check to make sure management service is up and running. This may cause data received from Compaq SNMP agent to be old or invalid.

Event identifier: cpqnimsg.dll - 1030 (Hex)0xc4350406 (Service Event)

Log Severity: Error (3)

Log Message: The NIC SNMP Management Agent was unable to process a SNMP request because the Insight Agents Service is not up and running.

Event identifier: cpqnimsg.dll - 1031 (Hex)0x44350407 (Service Event)

Log Severity: Information (1)

Log Message: The NIC SNMP Management Agent has continued refreshing data for the key associated with %1.

Event identifier: cpqnimsg.dll - 1032 (Hex)0x84350408 (Service Event)

Log Severity: Warning (2)

Log Message: Unable to read security configuration information. SNMP sets have been disabled.

Cause: This can be caused by an invalid or missing configuration or by a corrupt registry. Reinstalling the Insight Agents may correct this problem.

Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event)

Log Severity: Information (1)

Log Message: The SNMP Insight Agent will allow SNMP sets.

Event identifier: cpqnimsg.dll - 1034 (Hex)0x4435040a (Service Event)

Log Severity: Information (1)

Log Message: The SNMP Insight Agent will not allow SNMP sets.

Event identifier: cpqnimsg.dll - 1035 (Hex)0xc435040b (Service Event)

Log Severity: Error (3)

Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file. Reinstalling the Insight Agents or running the Emergency Repair procedure may correct this error.

Event identifier: cpqnimsg.dll - 1036 (Hex)0x8435040c (Service Event)

Log Severity: Warning (2)

Log Message: The NIC SNMP Management Agent was unable to forward an SNMP trap to the Compaq Remote Insight Board trap due to processing error. The data contains the error code.

Event identifier: cpqnimsg.dll - 1037 (Hex)0x8435040d (Service Event)

Log Severity: Warning (2)

Log Message: The NIC SNMP Management Agent was unable to get last modification time for key %1.

Event identifier: cpqnimsg.dll - 1038 (Hex)0x8435040e (Service Event)

Log Severity: Warning (2)

Log Message: The Management Agent service is not running. The SNMP Management Agent has determined that the Management Agent service is not running. Stop the SNMP service and restart the Management Agents service. If the error persists, reinstalling the Management Agents may correct this error.

Event identifier: cpqnimsg.dll - 1039 (Hex)0x4435040f (Service Event)

Log Severity: Information (1)

Log Message: The NIC SNMP Management Agent has determined the Insight Agent Management service is running.

Event identifier: cpqnimsg.dll - 1040 (Hex)0x44350410 (Service Event)

Log Severity: Information (1)

Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Insight Agent control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access configuration. If this error persists, reinstalling the Insight Agents or the Remote Access Service may correct this error. For more information, see the Insight Asynchronous Management documentation.

NT Event ID: 1282 (Hex)0x44350502 (cpqnimsg.dll)

Log Severity: Information (1)

Log Message: Redundancy has been increased by the NIC in slot %1, port %2. Number of functional NICs in the team: %3.

SNMP Trap: cpqNicRedundancyIncreased - 18003 in CPQNIC.MIB

Symptom: This trap is sent any time a previously failed physical adapter in a connected logical adapter group returns to the OK condition. This trap is not sent when a logical adapter group has connectivity restored from a Failed condition. The cpqNicConnectivityRestored trap is sent instead. This can be caused by replacing a faulty cable or by connecting a cable that was disconnected.

User Action: None required.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqNicIfLogMapAdapterOKCount

Supporting SNMP Trap Description: “Redundancy increased by adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1283 (Hex)0xc4350503 (cpqnimsg.dll)

Log Severity: Error (3)

Log Message: Redundancy has been reduced by the NIC in slot %1, port %2. Number of functional NICs in the team: %3.

SNMP Trap: cpqNicRedundancyReduced - 18004 in CPQNIC.MIB

Symptom: This trap is sent any time a physical adapter in a logical adapter group changes to the Failed condition, but at least one physical adapter remains in the OK condition. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition.

User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqNicIfLogMapAdapterOKCount

Supporting SNMP Trap Description: “Redundancy decreased by adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1290 (Hex)0x4435050A (cpqnimsg.dll)

Log Severity: Information (1)

Log Message: Connectivity has been restored for the NIC in slot %1, port %2.

SNMP Trap: cpqNic3ConnectivityRestored - 18011 in CPQNIC.MIB

Symptom: This trap is sent any time connectivity is restored to a logical adapter. This occurs when the physical adapter in a single adapter configuration returns to the OK condition or at least one physical adapter in a logical adapter group returns to the OK condition. This can be caused by replacement of a faulty cable or re-attaching a cable that was unplugged.

User Action: None required.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqSiServerSystemId
  • cpqNicIfPhysAdapterStatus
  • cpqSePciSlotBoardName
  • cpqNicIfPhysAdapterPartNumber
  • ipAdEntAddr
  • cpqNicIfLogMapIPV6Address

Supporting SNMP Trap Description: “Connectivity is restored for adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1291 (Hex)0xc435050B (cpqnimsg.dll)

Log Severity: Error (3)

Log Message: Connectivity has been lost for the NIC in slot %1, port %2.

SNMP Trap: cpqNic3ConnectivityLost - 18012 in CPQNIC.MIB

Symptom: This trap is sent any time the status of a logical adapter changes to the Failed condition. This occurs when the adapter in a single adapter configuration fails, or when the last adapter in a redundant configuration fails. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition.

User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqSiServerSystemId
  • cpqNicIfPhysAdapterStatus
  • cpqSePciSlotBoardName
  • cpqNicIfPhysAdapterPartNumber
  • ipAdEntAddr
  • cpqNicIfLogMapIPV6Address

Supporting SNMP Trap Description: “Connectivity lost for adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1292 (Hex)0x4435050C (cpqnimsg.dll)

Log Severity: Information (1)

Log Message: Redundancy has been increased by the NIC in slot %1, port %2. Number of functional NICs in the team: %3.

SNMP Trap: cpqNic3RedundancyIncreased - 18013 in CPQNIC.MIB

Symptom: This trap is sent any time a previously failed physical adapter in a connected logical adapter group returns to the OK condition. This trap is not sent when a logical adapter group has connectivity restored from a Failed condition. The cpqNicConnectivityRestored trap is sent instead. This can be caused by replacing of a faulty cable or connecting a cable that was disconnected.

User Action: None required.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqSiServerSystemId
  • cpqNicIfPhysAdapterStatus
  • cpqSePciSlotBoardName
  • cpqNicIfPhysAdapterPartNumber
  • ipAdEntAddr
  • cpqNicIfLogMapIPV6Address
  • cpqNicIfLogMapAdapterOKCount

Supporting SNMP Trap Description: “Redundancy increased by adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”

NT Event ID: 1293 (Hex)0xc435050D (cpqnimsg.dll)

Log Severity: Error (3)

Log Message: Redundancy has been reduced by the NIC in slot %1, port %2. Number of functional NICs in the team: %3.

SNMP Trap: cpqNic3RedundancyReduced - 18014 in CPQNIC.MIB

Symptom: This trap is sent any time a physical adapter in a logical adapter group changes to the Failed condition, but at least one physical adapter remains in the OK condition. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition.

User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement.

Supporting SNMP Trap Data:

  • sysName
  • cpqHoTrapFlags
  • cpqNicIfPhysAdapterSlot
  • cpqNicIfPhysAdapterPort
  • cpqSiServerSystemId
  • cpqNicIfPhysAdapterStatus
  • cpqSePciSlotBoardName
  • cpqNicIfPhysAdapterPartNumber
  • ipAdEntAddr
  • cpqNicIfLogMapIPV6Address
  • cpqNicIfLogMapAdapterOKCount

Supporting SNMP Trap Description: “Redundancy decreased by adapter in slot [cpqNicIfPhysAdapterSlot], port [cpqNicIfPhysAdapterPort].”