Event Identifiers 4352-4626
Event identifier: cpqhsmsg.dll - 4352 (Hex)0x84351100 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not allocate memory. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4353 (Hex)0x84351101 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not open the base of the registry. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4354 (Hex)0x84351102 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4355 (Hex)0x84351103 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4356 (Hex)0x84351104 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not read the registry value “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4357 (Hex)0x84351105 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent found an incorrect type for registry value “%1”. The data contains the type found.
Event identifier: cpqhsmsg.dll - 4358 (Hex)0x84351106 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not create a necessary event. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4359 (Hex)0x84351107 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not set an event. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4360 (Hex)0x84351108 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not create its main thread of execution. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4361 (Hex)0x84351109 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent main thread did not terminate properly. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4362 (Hex)0x8435110a (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent got an unexpected error code while waiting for an event. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4363 (Hex)0x8435110b (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent did not respond to a request. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4364 (Hex)0x8435110c (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent received an unknown action code from the service. The data contains the action code.
Event identifier: cpqhsmsg.dll - 4365 (Hex)0x8435110d (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not get the system type. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4402 (Hex)0x84351132 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not create an SNMP session. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4403 (Hex)0x84351133 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent SNMP request failed. The data contains the error code.
Action: Complete the following steps:
- Be sure that the SNMP service is configured to allow SNMP requests from “localhost.”
- Be sure that there is an adequate amount of free memory.
Event identifier: cpqhsmsg.dll - 4405 (Hex)0x84351135 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not set the variable because it is unsupported. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4406 (Hex)0x84351136 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not set the variable because the value is invalid or out of range. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4407 (Hex)0x84351137 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent is not loaded. Sets are not available. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4608 (Hex)0x84351200 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will correct this error.
Event identifier: cpqhsmsg.dll - 4609 (Hex)0x84351201 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 4610 (Hex)0x84351202 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 4611 (Hex)0x84351203 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 4612 (Hex)0x84351204 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 4613 (Hex)0x84351205 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key: “%1”. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 4623 (Hex)0x8435120f (Service Event)
Log Severity: Warning (2)
Log Message: The Agent could not access WMI. The WMI support may have not been started or installed. Restart or Install WMI service and restart the agents.
Event identifier: cpqhsmsg.dll - 4624 (Hex)0x84351210 (Service Event)
Log Severity: Warning (2)
Log Message: The Agent requires WMI service to be running. If NT 4.0 installed the latest version of WMI from Microsoft®, WMI service may need to be started.
Event identifier: cpqhsmsg.dll - 4625 (Hex)0x84351211 (Service Event)
Log Severity: Warning (2)
Log Message: The Agent failed to initialize WMI. WMI service may not have started or may still be in the starting state.
Event identifier: cpqhsmsg.dll - 4626 (Hex)0x84351212 (Service Event)
Log Severity: Warning (2)
Log Message: The Agent failed to process the MOF file to get the data from WMI. Problem with WMI service or MOF file or wrong file paths used.