DIMM handling guidelines

CAUTION: Failure to properly handle DIMMs can cause damage to DIMM components and the system board connector.

When handling a DIMM, observe the following guidelines:

Avoid electrostatic discharge.
Always hold DIMMs by the side edges only.
Avoid touching the connectors along the bottom of the DIMM.
Never wrap your fingers around a DIMM.
Avoid touching the components on the sides of the DIMM.
Never bend or flex the DIMM.

When installing a DIMM, observe the following guidelines:

Before seating the DIMM, open the DIMM slot and align the DIMM with the slot.
To align and seat the DIMM, use two fingers to hold the DIMM along the side edges.
To seat the DIMM, use two fingers to apply gentle pressure along the top of the DIMM.

For more information, see the Hewlett Packard Enterprise website.