GE Fanuc 90-30 Ethernet
Estimated reading time: 2 minutes
Refer to these sections for details:
Supported Series
GE Fanuc 90-30 series, CPU model 374plus.
Website: http://ge.com
PLC Connection Settings
Parameters | Recommended | Options | Notes |
---|---|---|---|
PLC Type | GE Fanuc 90-30 Series (Ethernet) | ||
PLC Interface | Ethernet | ||
Port # | 18245 | ||
Station # | 1 | 1 ~ 99 |
OT Link Platform DeviceHub Configuration
To configure DeviceHub for this GE Fanuc 90-30 Ethernet PLC:
-
DeviceHub > Add Device
Type: GE Fanuc
Driver: GE Fanuc 90-30 Ethernet -
Enter details specific to your environment and click Add Device.
Device Addresses
Bit/Word |
Device Type |
Format |
Range |
Description |
---|---|---|---|---|
B |
I_Bit |
DDDDD |
1 ~ 32768 |
|
B | Q_Bit | DDDDD | 1 ~ 32768 | |
B | M_Bit | DDDDD | 1 ~ 32768 | |
B | G_Bit | DDDDD | 1 ~ 32768 | |
B | T_Bit | DDDDD | 1 ~ 32768 | |
B | SA_Bit | DDDDD | 1 ~ 32768 | Read-only Register |
B | SB_Bit | DDDDD | 1 ~ 32768 | Read-only Register |
B | SC_Bit | DDDDD | 1 ~ 32768 | Read-only Register |
B | S_Bit | DDDDD | 1 ~ 32768 | Read-only Register |
W | I | DDDDD | 1 ~ 32753 | 8-word address increments |
W | Q | DDDDD | 1 ~ 32753 | 8-word address increments |
W | M | DDDDD | 1 ~ 32753 | 8-word address increments |
W | G | DDDDD | 1 ~ 32753 | 8-word address increments |
W | T | DDDD | 1 ~ 1024 | 8-word address increments |
W | SA | DDDDD | 1 ~ 32753 | Read-only Register; 8-word address increments |
W | SB | DDDDD | 1 ~ 32753 | Read-only Register; 8-word address increments |
W | SC | DDDDD | 1 ~ 32753 | Read-only Register; 8-word address increments |
W | S | DDDDD | 1 ~ 32753 | Read-only Register; 8-word address increments |
W | R | DDDDD | 1 ~ 32768 | |
W | AI | DDDDD | 1 ~ 32768 | |
W | AQ | DDDDD | 1 ~ 32768 | |
W | W | DDDDDDD | 1 ~ 5000000 |