Omron Fins Ethernet
Estimated reading time: 2 minutes
Refer to these sections for details:
Supported Series
OMRON CJ Series, CS Series, CP Series +Ethernet Module. (Ethernet FINS).
Website: http://www.omron.com/
On initialization, switch from RUN MODE to MONITOR MODE.
PLC Connection Settings
Parameters | Recommended | Options | Notes |
---|---|---|---|
PLC Type | Omron Ethernet | ||
PLC Interface | Ethernet (UDP) | ||
Port # | 9600 | ||
PLC Station # | 0 |
PLC Configuration
The setup shown here is for the Omron-Ethernet-CJ module.
Communication mode: Ethernet (UDP) protocol
OT Link Platform DeviceHub Configuration
To configure DeviceHub for this Omron PLC:
-
DeviceHub > Add Device
Type: Omron
Driver: Omron Fins Ethernet -
Enter details specific to your environment and click Add Device.
Device Addresses
Bit/Word |
Device Type |
Format |
Range |
Description |
---|---|---|---|---|
B |
CIO_Bit |
DDDDDdd |
0 ~ 3276715 |
Channel I/O (CIO) |
W |
CIO |
DDDDD |
0 ~ 32767 |
Channel I/O (CIO) |
W |
W |
DDDDD |
0 ~ 32767 |
Work Area (WR) |
W |
H |
DDDDD |
0 ~ 32767 |
Holding Area (HR) |
W |
A |
DDDDD |
0 ~ 32767 |
Auxiliary Relay (AR) (Read only) |
W |
C |
DDDDD |
0 ~ 32767 |
Counter (CNT) |
W |
T |
DDDDD |
0 ~ 32767 |
Timer (TIM) |
W |
D |
DDDDD |
0 ~ 32767 |
Data Memory (DM) |
W |
EM0 |
DDDDD |
0 ~ 32767 |
Extend Memory |
W | EM1 | DDDDD | 0 ~ 32767 |
Extend Memory |
W | EM2 | DDDDD | 0 ~ 32767 |
Extend Memory |
W | EM3 | DDDDD | 0 ~ 32767 |
Extend Memory |