Appliance errors Warning: The Solid State Drive (SSD) wear reached the warning threshold for the appliance Critical: The Solid State Drive (SSD) wear reached the critical threshold for the appliance The appliance is reporting a high temperature status The processor subsystem in the appliance is in a critical/warning state The memory subsystem in the appliance is in a warning/critical state The network subsystem in the appliance. <enclosure name and bay location as hyperlink> is in a warning/critical state The swap usage on the appliance exceeded the critical usage threshold The swap usage on the appliance exceeded the warning usage threshold The physical memory usage on the appliance exceeded the critical usage threshold The physical memory usage on the appliance exceeded the warning usage threshold The disk usage on the appliance {enclosure name and bay number} exceeded the warning usage threshold The disk usage on the appliance {enclosure name and bay number} exceeded the critical usage threshold The CPU usage on the appliance exceeded the critical utilization threshold The CPU usage on the appliance exceeded the warning utilization threshold The appliance encountered an internal communication problem with management processor The appliance cluster is no longer highly available The appliance could not be clustered Changes made on {active enclosure name and bay number} are being synchronized to {active enclosure name and bay number} This appliance, {enclosure name and bay number}, has not discovered the frame that contains it {Enclosure name and bay number} cannot join the appliance cluster because it is the wrong model {Enclosure name and bay number} cannot join the appliance cluster because its firmware version is incompatible {Enclosure name and bay number} cannot join the appliance cluster because it belongs to another cluster or is trying to form one {Enclosure name and bay number} cannot join the appliance cluster because it belongs to another cluster or is trying to form one {Enclosure name and bay number} is not configured for high availability: no standby appliance was found {Enclosure name and bay number} cannot join the appliance cluster because it is not ready The appliance cluster is no longer highly available because {enclosure name and bay number} was physically removed The appliance cluster is no longer highly available The appliance cluster is no longer highly available The appliance cluster is no longer highly available {Frame name} has appliances in both appliance bays This appliance, {enclosure name and bay number}, cannot communicate with its frame This appliance, {enclosure name and bay number}, cannot communicate with its frame {Enclosure name and bay number} cannot join the appliance cluster because this appliance cannot communicate with its frame IPv4 Gateway is not reachable File system errors were detected during appliance startup and an automatic correction was attempted to bring up the appliance Proxy server {address} cannot be resolved to an IP address Network settings are configured for recovery remote access An error occurred during network interface configuration of the appliance An error occurred during network interface configuration of the appliance An error occurred during network interface configuration of the appliance An unexpected interruption happened during setting of appliance network configuration Failed to discover hardware The specified IP addresses: {appliance IP address} and {gateway IP address} are not in the same subnet {subnet mask} DHCP Server failed to provide a valid {IPv4 or IPv6} Address for MAC Address {Appliance IP address} address does not resolve to {appliance hostname} {Appliance hostname} address does not resolve to {appliance IP address} {DNS server IP address} is not responding as a DNS server Unable to communicate with NTP server Unable to resolve the IP address for NTP server Unable to synchronize with NTP server The appliance could not sync with the NTP server The backup was not taken and downloaded for certain number of hours since last backup The backup was not taken and saved at the scheduled time