Server iLO SNMP traps Cold start Link down Link up Authentication failure The state of the processor in slot X is Y A read error occurred on the Flash Media in Slot X of a USB storage device attached to the system A write error occurred on the Flash Media in Slot X of a USB storage device attached to the system Redundancy is lost on a USB storage device attached to the system Redundancy is lost on a USB storage device attached to the system Redundancy is restored on a USB storage device attached to the system Sync operation to restore redundancy failed on a USB storage device attached to the system The temperature of the PCIe disk at location X has crossed the upper critical threshold The temperature of the PCIe disk at location X is normal The status of the PCIe disk at location X is Y The PCIe disk wear status for the disk at location X is Y A PCI device at Bus X, Device Y, Function Z has been added to the system or powered on A PCI device at Bus X, Device Y, Function Z has been removed from the system or powered off Host controller has a new status of X Controller status is now X for controller located in Y Logical drive status is now X for drive Y on controller located in Z Cache module board status is now X for board located in Y Cache module board lost backup power: data loss possible Cache module board backup power source status is failed for controller located in X Physical drive status is now X for drive at location Y connected to controller in Z Spare status is now X for drive at location Y connected to controller in Z Solid state disk wear status is now X for drive at location Y connected to controller in Z Server is operational again after thermal shutdown Power On Self Test (POST/UEFI) errors occurred during server restart The power supplies are no longer redundant on chassis X The power supply has been installed on chassis X, bay Y The power supply has been removed on chassis X, bay Y The fan degraded on chassis X, fan Y The fan failed on chassis X, fan Y The fans are no longer redundant on chassis X The fan has been inserted on chassis X, fan Y The fan has been removed on chassis X, fan Y A temperature sensor detected a condition that could permanently damage the system Temperature normal on chassis X, location Y The power supply is ok on bay X, status Y, model Z, serial number A, firmware B The power supply is degraded on chassis X, bay Y, status Z, model A, serial number B, firmware C The power supply is failed on chassis X, bay Y, status Z, model A, serial number B, firmware C The Advanced Memory Protection subsystem has engaged the online spare memory The power supplies are now redundant on chassis X The fans are now redundant on chassis X Correctable \ uncorrectable memory errors require a replacement of the memory module in slot X, cpu Y, riser Z, socket A The power supply AC power loss in X, bay Y status Z, model A, serial number B, firmware C The Battery Has Failed on Chassis X, Index Y, Status Z, Model A, Serial Num B, Spare Part C The Battery Has Been Removed on Chassis X, Index Y Server power allocation could not be optimized FRU device read error, status X A device connected to or embedded on the system board has an error There is a device missing or improperly seated on the system board Storage system fan status changed to X for location Y connected to controller Z Storage system power supply status changed to X for location Y connected to controller Z Storage system connection status changed to X for location Y connected to controller Z Server reset detected Integrated Lights-Out detected more than X unauthorized login attempts Remote Insight/Integrated LightsOut self test error Remote Insight/Integrated Lights-Out firmware has detected the security override jumper has been engaged Remote Insight/Integrated Lights-Out firmware has detected the security override jumper has been disengaged The server has been powered on The server has been powered off The iLO to Insight Remote Support or Insight Online communication failed Power threshold has been exceeded SAS/SATA physical drive status is now X for drive at location Y connected to controller in Z Solid state disk wear status is now X for drive at location Y connected to controller in Z ATA disk drive status is now X for drive Y Connectivity is restored for adapter in slot X port Y Connectivity lost for adapter in slot X, port Y Redundancy increased by adapter in slot X, port Y Redundancy decreased by adapter in slot X, port Y The overall condition of the processor subsystem is critical The overall condition of the processor subsystem is in the error state The condition of the memory subsystem is critical The system is running in an error state because the Advanced Memory Protection subsystem has been engaged The memory subsystem is operating normally A required fan is not operating properly A non-required fan is not operating properly All fans are operating properly Temperature out of range on chassis X, location Y A temperature sensor detected a condition that could permanently damage the system A temperature sensor is outside of normal operating range All temperature sensors are within normal operating range The overall condition of the fault tolerant power supply subsystem is critical The overall condition of the fault tolerant power supply subsystem is in the error state The overall condition of the fault tolerant power supply subsystem is ok There are failed entries in the iLO Integrated Management Log Automatic Server Recovery (ASR) reboot count is greater than or equal to the reboot count limit Last reboot was an Automatic Server Recovery (ASR) reboot but the reboot count is less than the reboot limit Last reboot was not an Automatic Server Recovery (ASR) reboot The overall status of the drive array subsystem is critical The overall status of the drive array subsystem is in the error condition The overall status of the drive array subsystem is ok The overall status of the SCSI drive subsystem is critical The overall status of the SCSI drive subsystem is in the error state The overall status of the SCSI drive subsystem is ok The overall status of the storage enclosure is critical The overall status of the storage enclosure is in the error state The overall status of the storage enclosure is ok The overall status of the IDE disk subsystem is critical The overall status of the IDE disk subsystem is in the error state The overall status of the IDE disk subsystem is ok The Fiber Channel (FC) status is critical The Fiber Channel (FC) status is in the error state The Fiber Channel (FC) status is ok The overall status of the system network is critical The overall status of the system network is in the error state The overall status of the system network is ok The overall condition of the iLO is critical The overall condition of the iLO is in the error state The overall condition of the iLO is ok The BIOS/Hardware status is critical The BIOS/Hardware is in the error state The BIOS status/Hardware is ok The overall condition of the battery backup subsystem is critical The overall condition of the battery backup subsystem is in the error state The overall condition of the battery backup subsystem is ok