The interconnect in bay X was not allowed to power on due to a connector mating error
The interconnect in bay X was not allowed to power on due to a connector mating error.
ID: hpris.emRegistry.<version>.InterconnectPowerDeniedDueToMating
Severity: Warning
Health Category: Power
Resource URI: /rest/v1/Chassis/1/InterconnectBays/1/
The connector did not align properly with the frame bay pins.
- Remove the interconnect module.
-
Inspect the connector for damage, and then do one of the following:
- If the connector is damaged, replace the device.
- If the connector is not damaged, reinstall the device.
For more information, see the frame maintenance and service guide on the Hewlett Packard Enterprise website.