The device in bay X was not allowed to power on due to a connector mating error
The device in bay X was not allowed to power on due to a connector mating error.
ID: hpris.emRegistry.<version>.BladePowerDeniedDueToMating
Severity: Warning
Health Category: Power
Resource URI: /rest/v1/Chassis/1/BladeBays/1/
The device connector did not align properly with the frame bay pins.
- Remove the device.
-
Inspect the connector for damage, and then do one of the following:
- If the connector is damaged, replace the device.
- If the connector is not damaged, reinstall the device.
For removal and replacement procedures, see the frame maintenance and service guide in the Hewlett Packard Enterprise Information Library.