Enclosure management errors An unexpected problem was encountered while processing a change in interconnect bay X An unexpected problem was encountered creating an Image Streamer storage cluster An unexpected problem was encountered creating a logical interconnect Failed to delete logical enclosure An unexpected problem was encountered while processing a change in device bay X The firmware is below the minimum supported version There was an unexpected problem processing an update to the enclosure group Removing the enclosure failed The enclosure is being managed by another management system The enclosure is being monitored by another management system List of unexpected subcomponent add error messages OneView is unable to communicate with the enclosure's link modules An unexpected problem was encountered while processing a change in appliance bay X An unexpected problem was encountered while processing a change in fan bay X The health status of fan X has been set to {status} The logical enclosure is inconsistent with its enclosure group Insufficient IP addresses in the IPv4 address pool to allocate an IP for each device and interconnect The actual IPv4 address X for {device} does not match the expected configuration The actual IP address type X for {device} does not match the expected configuration The actual IPv4 address X for {device} does not match the expected configuration The actual IP address type X for {device} does not match the expected configuration Z X is not configured to use DHCP as specified X is not configured to use external address as specified X is not configured with the IPv4 address allocated to it by the logical enclosure The iLO in X is not configured to use DHCP as specified The iLO in X is not configured to use external address as specified The iLO in X is not configured with the IPv4 address allocated to it by the logical enclosure The ambient temperature mode for enclosure X does not match the logical enclosure ambient temperature mode There was an unexpected problem processing an update to the logical enclosure An unexpected problem was encountered while processing a change in link module X OneView is unable to communicate with the enclosure's link modules Fan configuration is not sufficient for proper device cooling Unable to refresh the enclosure An unexpected problem was encountered while processing a change in power supply bay X The health status of power supply X has been set to {status} The ambient temperature mode of server hardware X is not consistent with the logical enclosure configuration The power mode for enclosure X does not match the logical enclosure power mode