The frame link topology is not complete and does not have an active MGMT uplink port

Symptom

The frame link topology is not complete and does not have an active MGMT uplink port. As a result, there is no management network connectivity to devices outside the topology.

ID: hpris.emRegistry.<version>.SessionTimeout

Severity: Critical

Health Category: Enclosure

Action
  1. Verify that all LINK ports are properly connected.
  2. Connect a MGMT port from one of the frame link modules within the topology to the management network.

    For more information, see the frame setup and installation guide on the Hewlett Packard Enterprise website.