Click to view the SPP Support Statement

The Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image. This solution uses Smart Update Manager (SUM) as the deployment tool and is tested on all HPE ProLiant Gen9 and Gen10 servers as defined in the Service Pack for ProLiant Server Support Guide found at www.hpe.com/servers/spp/documentation.

Important Notes:

The 2019.12.2 SPP contains updates pertaining to Customer Bulletin a00102358en_us.

This version of SPP addresses the vulnerability described in the bulletin that impacts Offline mode of update using bootable ISO of HPE Service Pack for ProLiant (SPP) on a Secure Boot mode enabled system.

 

Please also review the following notices pertaining to Critical FW updates:

  • CB a00097210en_us- HPE Smart Array SR Gen10 Controllers - FIRMWARE UPDATE REQUIRED to Prevent Potential Data Inconsistency on Select RAID Configurations Created with Smart Array Gen10 Firmware Version 1.98 through 2.62
  • CB a00094722en_us - HPE ProLiant, Synergy and Superdome Flex Host Bus Adapters (HBA) - Certain Fibre Channel HBA Firmware May Cause the Operating System to Halt and Potentially Compromise Filesystem Data Integrity
    • The QLogic Fibre Channel HBA firmware upgrade is required, which is described in the above Customer Bulletin for QLogic Fibre Channel (FC) Host Bus Adapters (HBAs), SN1100Q, SN1600Q and SN1610Q
    • After deploying the SPP, users must update to Multi Boot Image (MBI) version detailed in the Customer Bulletin immediately.
  • CA a00094676en_us - When using HPE OneView prior to version 5.00.00 and the 2019.12.0 SPP, an error may be seen during FW update of iLO5. CA has the additional information

 

Components for the following Operating Systems are no longer included in this SPP:

•Windows 2012

•RHEL 6 (all updates)

•vSphere 6.0 (all updates)

 

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update. 

 

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

 

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.

Release Summary:

The 2019.12.2 Gen10 SPP addresses BootHole Vulnerabilities.

Download(s)

By downloading these products, you agree to the terms and conditions of the End User License Agreement(s) listed below. Refer to the documentation regarding using the image once downloaded to your environment.

NOTICE: Login with your HPE Passport account to access the SPP via the HPE Support Center. An active warranty or HPE support agreement is no longer required to download the Gen10 SPP. Additionally, you must have an active warranty or support agreement linked to your HPE Passport account to access previous SPP releases. For more information, please view the SPP Warranty/Support Agreement Validation document.



SPP Custom Download

Create an SPP Custom Download
Filter the SPP to create a customized download. Add SPP Supplements or reduce the download size by selecting pre-defined filter sets or choosing individual filter options.

SPP ISO
Supplements

This tab includes only significant Customer Advisories (CAs) that are known to exist within or be corrected by this release.

 

Hot Fixes
Resolved CAs
Open CAs
Known Limitations

Resolved CAs

Date CA Number Description Fixed SPP Version
6/30/2020 a00047964 (Revision) HPE Network Adapters - HPE Intel Online Firmware Upgrade for VMware Performed Via Service Pack for ProLiant (SPP) Version 2018.03.0 (Or Later) Will Not Be Successful On Certain Systems Running VMware ESXi 6.0 / 6.5 / 6.7 Future Release
5/28/2020 a00060570 (Revision) ProLiant Gen9 Series Servers - Unexpected Reset or Shutdown May Occur on ProLiant Gen9 Servers Future Release
5/22/2020 a00094722 (Revision) HPE ProLiant, Synergy and Superdome Flex Host Bus Adapters (HBA) - Certain Fibre Channel HBA Firmware May Cause the Operating System to Halt and Potentially Compromise Filesystem Data Integrity Future Release
5/21/2020 a00056172 (Revision) HPE ProLiant Gen10 and ProLiant Gen10 Plus Servers - Video Loss or Black Screen May Occur Future Release
4/21/2020 a00098969 Smart Update Manager (SUM) - The SUM /sbin/smartupdate Script Checks /var Directory And Sub-Directories for "noexec" Permission Incorrectly Future Release
4/14/2020 a00097984 HPE Solid State Drives - Certain HPE SATA SSDs May Return Unexpected Data When Drive Statistics Are Queried and Could Result in Server Instability Future Release
3/2/2020 a00095304 (Revision) ProLiant XL170r Gen9 and ProLiant XL190r Server - HDD Zone Mapping Resets to Default After SAS Expander Firmware Is Upgraded to 1.51 (Disks No Longer Appear Online) Future Release
2/26/2020 a00051848 (Revision) ProLiant DL325 Gen10 And ProLiant DL385 Gen10 Servers - System May Become Unresponsive When Flashing The Smart Component For NVMe Backplane Firmware Future Release
11/21/2019 a00092445 HPE ProLiant, Apollo and Synergy - Systems Configured With Intel Xeon Scalable Performance Processors System ROM Version 2.20 Is Being Replaced With Version 2.22 Future Release
10/2/2019 a00069344 (Revision) HPE Network Adapters - HPE QLogic NX2 Online Firmware Upgrade Utility for VMware 6.7 Version 2019.03.01 May Fail to Complete In the SPP, When an HPE QLogic Fibre Channel Network Adapter Is Configured on Gen9/Gen10 Servers Future Release
7/26/2019 a00078768 HPE StoreFabric Host Bus Adapters - During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels Future Release
6/12/2019 a00071158 (Revision) HPE Gen10 Smart Array Controllers - Disks May Go Offline And Out of Memory/APD Conditions May Be Experienced on HPE Gen10 Servers Configured With Certain HPE Smart Array Controllers Running In a VMware vSAN Environment Future Release
6/4/2019 a00074697 HPE Intel Ethernet 10Gb 562SFP+ Adapter – HPE Intel i40ea Driver for Windows Server 2016 Versions 1.8.83.0 or 1.8.94.0 May Cause NTFS File Corruption to iSCSI Mounted Volumes When Jumbo Frames Are Enabled Future Release
6/1/2019 a00074690 HPE Smart Array Gen9 Controllers - Firmware Update Required to Prevent Potential Data Loss With "1831-Slot X Drive Array" Message After Shutting Down the System by Pressing the Power Button or Selecting "Momentary Press" in HPE iLO During POST Future Release
5/22/2019 a00073851 HPE Dynamic Smart Array B140i Controller - HPE Servers Running VMware ESXi 6.0/6.5/6.7 and Configured With an HPE Dynamic Smart Array B140i Controller May Experience a PSOD When Updating to Hpdsa Driver Version 5.5.0.66 Future Release
4/18/2019 a00070779 HPE Solid State Drives - Certain HPE SAS Solid State Drives May Fail Within a Few Days of Install With Timeout Messages in the Serial Log if a Very Small Amount of Data Is Written to the Drives and They Are Left Powered-On Future Release
4/2/2019 a00020204 (Revision) HPE Network Adapters - HPE QLogic NX2 Online Firmware Upgrade Utility Requires The HPE QLogic NX2 10/20 GbE Multifunction Driver For Windows Server Version 7.13.113.0 (Or Later) To Prevent a Firmware Upgrade Failure Future Release
4/2/2019 a00069761 VMware - Service Pack for ProLiant (SPP) Version 2019.03.0 May Fail to Update on HPE ProLiant Gen10 Servers Running VMware ESXi 6.5 Using Integrated Smart Update Tools (iSUT) Version 2.3.6 Future Release
3/19/2019 a00066514 HPE Hard Disk Drives - FIRMWARE UPGRADE REQUIRED For Certain HPE 7.2K (2TB/1TB) SATA Hard Disk Drives to Prevent a Potential Data Integrity Risk Future Release
2/21/2019 a00066615 HPE ProLiant Gen10 Servers - SUM Is Unable to Deploy QLogic Fibre Channel Adapter Firmware Component On Systems Running VMware ESXi 6.0 / 6.5 / 6.7 And Configured With Certain QLogic Fibre Channel Host Bus Adapters Future Release
11/9/2018 a00059966 HPE ProLiant Gen10 Servers - HPE Management Software Bundle and HPE Utilities Software Bundle for VMware ESXi Are Not Listed in the Smart Update Manager (SUM) Inventory for Certain Servers Future Release
11/1/2018 a00059657 SUSE Linux Enterprise Server 15 - Firmware Upgrade Does Not Complete And Displays FWUPG_ERR [6] for HPE Broadcom Network Adapters in SUSE Linux Enterprise Server 15 with Secure Boot Enabled Future Release
10/16/2018 a00057922 HPE Host Bus Adapters - Firmware Update Required On Certain HPE HBAs When The HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for Windows 2012/R2, Windows 2016 x64 version 2018.09.0 Is Run And The Firmware Update Is Not Successful Future Release
9/22/2018 a00039267 (Revision) HPE ProLiant, Moonshot and Synergy Servers - Side Channel Analysis Method Allows Improper Information Disclosure in Microprocessors (CVE-2017-5715, CVE-2017-5753, CVE-2017-5754) Future Release
9/21/2018 a00056442 HPE ProLiant DL385 Gen10 Server - When Using SATA Hard Disk Drives, the System May Fail to Boot After Upgrading the HPE 12Gb SAS Expander to Firmware Version 4.02 Future Release
9/19/2018 a00053968 (Revision) VMware - On Any HPE Server Running VMware ESXi 6.5 with Certain HPE Emulex Network Adapters, One Or More Virtual Machines May Lose Or Intermittently Lose Network Communication Future Release
9/11/2018 a00056018 Linux - Firmware Updates for the HPE Smart Array P408i-sb Controller Contained Within the HPE D2500sb Storage Blade May Fail if smartpqi Driver Version 1.1.4-125 (or Later) Is Not Installed Future Release
9/10/2018 a00051852 HPE Hard Disk Drives - FIRMWARE UPGRADE REQUIRED For Certain HPE 7.2K (10TB/8TB) SAS and SATA Hard Disk Drives to Avoid Data Integrity Risk Future Release
8/29/2018 a00053954 HPE Solid State Drives and M.2 Drives - FIRMWARE UPGRADE REQUIRED - Potential False Failure Within the NAND on Certain SATA Solid State Drives or M.2 Drives Future Release
8/21/2018 a00048321 (Revision) HPE Solid State Drives and M.2 Drives - FIRMWARE UPGRADE REQUIRED - Potential Data Integrity Issue on Certain SATA Solid State Drives or M.2 Drives After an Unexpected Power Loss Future Release
7/24/2018 a00052165 HPE Gen10 Smart Array Controllers - In Rare Instances, Controllers May Stop Responding and Display a Lockup Message During POST When Running Smart Array Firmware Prior to Verson 1.60 Future Release
7/2/2018 a00050603 HPE Smart Array - HPE Smart Array S100i SR Gen10 SW RAID May Be Lost Following a System Reboot on HPE ProLiant Gen10 ML/DL Platforms Future Release
6/21/2018 a00049970 HPE ProLiant DL325 Gen10 Server - Hot-Plugging an NVMe Drive May Fail if More Than One Drive Is Connected Simultaneously When Using System ROM A4 11.30 06/07/2018 Future Release
5/23/2018 a00044907 HPE ProLiant and Apollo Servers- FIRMWARE UPGRADE REQUIRED for Certain HPE 7.2K (8TB/6TB) SATA Hard Drives to Avoid Data Integrity Risk Future Release
5/8/2018 a00042449 (Revision) Fibre Channel and Fibre Channel Over Ethernet Host Bus Adapters - Unmapping LUNS From Storage Might Result in a Purple Diagnostic Screen on VMware ESXi 5.5, 6.0, or 6.5 Future Release
5/7/2018 a00046664 HPE MSA Storage - New HPE MSA Best Practices Part 1 - Controller Firmware Future Release
5/4/2018 a00040080 (Revision) HPE Hard Disk Drives - Drives EH0300FCBVC and EH0146FCBVB With HPD9 Firmware Installed May Cause the Array Volume to Become Unresponsive and Result in Data Loss Future Release
4/27/2018 a00019942 (Revision) HPE Host Bus Adapters - Certain HPE Host Bus Adapters are Only Reporting Inlet Temperatures in Active Health Summary Future Release
4/3/2018 a00042625 HPE ProLiant Servers - FIRMWARE UPGRADE REQUIRED for Certain HPE 7.2K (6TB/4TB/2TB) SAS and SATA Hard Disk Drives to Avoid Data Integrity Risk Future Release
3/30/2018 a00041102 (Revised) HPE Fibre Channel Host Bus Adapters - Task Hangs During Fibre Channel Storage Array Port/Node Resets When Using A QLogic-Based FC Adapter Driver Present In HPE Service Pack For ProLiant 2017.07.01 And Later Future Release
3/1/2018 a00041830 HPE ProLiant and Apollo Servers - FIRMWARE UPGRADE REQUIRED For Certain 6G SATA SSD Models Future Release
2/27/2018 a00029108 (Revision) HPE Virtual Connect 4.60 and 4.61 - Reboot/Reset/Power-Cycle of Blade(s) or VC Module(s) May Result in Loss of Stacking Link Between VC Modules, Latency in FCoE Traffic and Uplink May Not Form LACP Group, Causing a Network Outage Future Release
2/9/2018 a00041476 HPE ProLiant DL360 Gen10 and HPE ProLiant DL380 Gen10 Servers - Server Cannot Be Configured to Use NPAR When Utilizing an HPE FlexFabric 536FLR-T Adapter Future Release
2/6/2018 a00016609 (Revision) ProLiant Gen9 Servers - Servers Running Certain Versions of the System ROM May Not Respond During POST After A Warm Boot If The System is Deployed With an HPE Dual 8GB microSD Enterprise Midline USB Kit With Firmware 202, 19 or 17 Future Release
2/5/2018 c05317292 (Revision) HPE ProLiant Agentless Management Service for Linux (hp-ams) - hp-ams May Segfault on HPE ProLiant Servers Running hp-ams Version 2.5.1 (or earlier) Future Release
1/24/2018 a00022398 (Revision) HPE Smart Array - HPE Gen10 Servers May Reboot Unexpectedly When Performing a Logical Drive Stripe Size Migration With a High Write Cache Ratio on Smart Array Controllers Future Release
1/13/2018 a00039777 ProLiant and Apollo Servers -FIRMWARE UPGRADE REQUIRED for Certain HPE 10K (1.8TB/1.2TB/900GB/600GB/300GB) and 15K (600GB/450GB/300GB) SAS Hard Drives to Avoid Data Integrity Risk Future Release
12/1/2017 a00036780 Linux - Intermittent Server Unresponsiveness May Occur on HPE Systems Running Linux with Emulex or Qlogic Fibre Channel Controllers When Running the hp-snmp-agents Along With the Associated Fibre Channel Enablement Kit Future Release
11/20/2017 a00016605 HPE ProLiant And Apollo Servers - FIRMWARE UPGRADE REQUIRED for Certain HPE Hard Disk Drives to Avoid Data Integrity Risk Future Release
11/13/2017 a00029265 HPE Smart Array Px2x Controllers - FIRMWARE UPGRADE REQUIRED - Update to Smart Array Firmware Version 8.32 To Prevent System Unresponsiveness Future Release
11/8/2017 a00035486 HPE Network Adapters - HPE Intel Online Firmware Component For Windows May Report "No Supported Hardware" On ProLiant Servers Configured With An HPE Ethernet 10Gb 2-port 562T Adapter Or An HPE Ethernet 10Gb 2-port 562FLR-T Adapter Future Release
10/31/2017 a00029847 HPE Synergy - Synergy Dual Domain SAS Configurations in a VMware vSAN 6.x Environment May Encounter Rebuild or Resync Issues During or After a Failure Future Release
10/16/2017 a00027721 HPE Solid State Drives and M.2 Drives - FIRMWARE UPGRADE REQUIRED - Potential Data Integrity Issue on Certain SATA Solid State Drives or M.2 Drives After an Extended Period of System Inactivity or Low-Power State Condition Future Release
9/20/2017 a00026814 HPE Network Adapters - With Certain Network Adapters, the Wake-On-LAN (WOL) Default Setting May Not Be Disabled On Port 2 Of The Adapter In The HII Menu Of The BIOS/Platform Configuration Future Release
9/19/2017 c05178933 (Revision) HPE Smart Array Controllers - VMware ESXi Storage Support Configuration With HPE Smart Array Controllers Future Release
8/26/2017 a00023019 Linux - Files in Directories Under /var/spool/compaq/hpasm/registry/ Have Set Group ID Up On Execution (SGID) Bit Set and the Total Memory May Display "0MB" in System Management Homepage (SMH) on HPE Servers Running HPE SNMP Agents for Linux Future Release
8/23/2017 a00020440 Host Bus Adapters - Fibre Channel Driver lpfc 11.1 Might Encounter a Purple Diagnostic Screen Displaying Page Fault #PF Exception 14 on VMware ESXi 5.5 and 6.0 Future Release
8/15/2017 a00022023 HPE ProLiant and Apollo Servers - FIRMWARE UPGRADE REQUIRED for Certain HPE 6/4TB Hard Disk Drives to Avoid Data Integrity Risk Future Release
8/4/2017 a00021580 HPE ProLiant and Apollo Servers - FIRMWARE UPGRADE REQUIRED for Certain HPE 1.8TB Hard Disk Drives to Avoid Data Integrity Risk Future Release
7/26/2017 a00020435 HPE ProLiant DL380 Gen10 Server - A Minimum System ROM Version 1.02 is Required When Using The 2SFF HDD SAS/SATA Riser Kit Future Release
7/24/2017 a00020209 HPE Network Adapters - HPE ProLiant Servers Configured With An HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter And Running a Linux Operating System May Display "Device's Health Compromised - Reached Miss Count " Errors Future Release
7/24/2017 a00020203 HPE Smart Array - A Windows Blue Screen Error May Occur With the HPE Smart Array driver (HPCISSs3.sys) Version 100.18.2.64 When the Controller Is Configured in RAID Mode Future Release
7/17/2017 a00007681 (Revision) Integrated Lights-Out 4 (iLO 4) - False Self-Test Error on USB Port May be Reported If the iLO 4 Firmware Is Upgraded to 2.50 or If iLO 4 Is Rebooted When an HPE ProLiant Gen8-Series Server or HPE ConvergedSystem 700 Is Powered Off Future Release
5/12/2017 a00009527 HPE Integrated Lights-Out 4 (iLO 4) - Registering iLO 4 with HPE Insight Online Direct Connect May Not Complete and Display "No Server Certificate" Future Release
5/3/2017 a00008705 HPE Integrated Lights-Out 4 (iLO 4) - iLO Amplifier Pack Cannot Be Used for Online Updates of Firmware, Drives and Software on HPE Servers with iLO 4 Firmware Version Earlier Than 2.53 Future Release
4/21/2017 c05190478 (Revision) HP Smart Update Manager 7.5.x - HP SUM May Display Failed Dependencies Messages When Attempting to Install Network Drivers on SUSE Linux Enterprise Server 11 SP3 (x86-64) Future Release
1/24/2017 c05300901 Linux - the HPE System Health Application and Command Line Utilities for Linux (hp-health) Daemon Stops When an HPE Integrated Lights-Out 4 (iLO 4) Reset Occurs and a "Critical Error: Restart hpasmlited Daemon" Message is Logged Future Release
12/8/2016 c04996097 (Revision) HPE Integrated Lights-Out 4 (iLO 4) - HPE Active Health System (AHS) Logs and HPE OneView Profiles May Be Unavailable with iLO Firmware Earlier Than 2.42 Causing iLO Self-Test Error 8192, Embedded Media Manager and Other Errors Future Release
11/9/2016 c05324152 HPE Integrated Lights-Out (iLO) - Connectivity Issues May Occur While Booting a Mounted Image When the Shared Network Port Is Enabled on HP FlexFabric 10Gb 2-port 562 FLR-SFP+/SFP Adapters Future Release
10/10/2016 c05105304 (Revision) HPE ProLiant Servers: Certain Smart Array Controllers Running VMware ESXi 5.5 or 6.0 May Cause a Double Completion Purple Screen of Death (PSOD) Future Release
8/31/2016 c04974081 (Revision) HPE Smart Array- Controller Detection of All Direct Attached Physical SATA Drives May Fail if a Single Drive Does Not Start Future Release
8/26/2016 c05245674 HPE Network Adapters - Red Screen of Death (RSOD) May Be Displayed On Some Nodes Using Mellanox 545 Network Adapters Running the Unified Extensible Firmware Interface (UEFI) 14.10.16 Future Release
8/9/2016 c05175070 (Revision) HPE ProLiant Gen9-Series Servers - Servers May Stop Responding When the Smart Storage Battery Option Fails with the HPE Integrated Lights-Out 4 (iLO 4) Firmware Version 2.40 or 2.42 and a System ROM Version of 2.20 Future Release
8/3/2016 c05216694 HPE ProLiant DL580 Gen9 Server - An Increased Rate of Uncorrectable Machine Check or Uncorrectable Memory Errors May Occur on Servers Configured with Intel Xeon E7-4800 v3 or E7-8800 v3-Series Processors and System ROM Version 2.20 Future Release
7/27/2016 c05214655 Windows/VMware/Linux - Driver Version 10.7.x.x (Or Later) for HP Emulex 4Gb Fibre Channel Host Bus Adapters May Not Be Identified by the Operating System Future Release
6/27/2016 c04978997 (Revision) HPE ProLiant Gen8-Series or HPE ProLiant Gen9-Series Server - Quick Test: Short Background Self Test Erroneously Fails at 100 Percent in HP Insight Diagnostics Future Release
6/1/2016 c05158732 HPE Smart Array Controllers- Data in Write-Backed Cache on a Gen9 Px4x Controller May Be Lost After an Unexpected System Shutdown Future Release
5/18/2016 c05140691 HPE ProLiant Servers - SYSTEM ROM UPGRADE RECOMMENDED for ProLiant DL585 G7, ProLiant DL385p Gen8, ProLiant BL685c G7, or ProLiant BL465c Gen8 Servers With a System ROM Earlier Than 3/7/16 to Avoid Issues in a Virtualized Environment Future Release
5/17/2016 c05072916 (Revision) HP Virtual Connect - Boot Mode May Change From UEFI to Legacy Mode Under Certain Conditions Future Release
5/14/2016 c05098585 (Revision) Certain ProLiant Gen8 and Gen9 Servers - Fans May Run at a High Speed After Updating The Adapter Firmware with Version 4.0.1.17 of the HPE Broadcom NX1 Online Firmware Upgrade Utility for Windows Future Release
5/5/2016 c04930508 (Revision) VMware - Recovered Paths Are Not Restored When Using an HPE Smart Array Controller Connected to a Shared Storage RAID Enclosure on VMware ESXi 5.0, ESXi 5.1, ESXi 5.5 or ESXi 6.0 Future Release
3/1/2016 c04956794 (Revision) HP SATA Hard Drives - Hard Disk Drive Firmware Upgrade Required For Certain 6G SATA Disk Models Future Release
2/16/2016 c04805565 (Revision) HP ProLiant Gen9 Servers - The Server May Stop Responding and Will Display Power-On Self-Test (POST) Error Messages on Reboot When Running Smart Array Controllers and/or Host Bus Adapters Future Release
1/26/2016 c04950529 HP Smart Array Controllers- HP ProLiant Gen9 Smart Array Controller Running in Host Bus Adapter (HBA) Mode May Fail Windows Storage Spaces Validation Test Future Release
12/11/2015 c04920780 HP Dynamic Smart Array B140i - Kernel Panic May Occur When Using the HP Dynamic Smart Array B140i Driver with Red Hat Enterprise Linux 6.x or CentOS 6.x Future Release
12/4/2015 c04912220 HP ProLiant Servers – The NIC Agent (CMANICD) Will Produce a Segfault with BOND Configured and Running hp-snmp-Agents Version 10.20 or 10.30 Future Release
10/21/2015 c04855352 HP OneView - The Server Profile Apply Operation May Fail for an HP ProLiant Gen9 Server Blade When an HP FlexFabric 20Gb 2-port 650FLB Adapter Is Installed Future Release
10/19/2015 c04853138 HP FlexFabric 20Gb 2-Port 650FLB Adapters - There Is No Distinction Between the Bootcode and the PXE (Preboot Execution Environment) Version on the System Management Homepage (SMH) for HP ProLiant BL460c Gen9 Server Blades Future Release
10/7/2015 c04834951 HP System Management Homepage - The System Management Homepage (SMH) Version 7.5.1 or 7.5.2 May Display Illegible Japanese and Chinese Language Text Characters Future Release
8/17/2015 c04756146 HP Virtual Connect - A Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem May Experience FCoE Network Outage When Multiple Uplink Ports Are Used Per Storage Area Network (SAN) Fabric Future Release
8/7/2015 c04760191 (Revision) HP Integrated Lights-Out 4 (iLO 4) Upgrading to iLO 4 Firmware From Version 2.20 From an Earlier Version Will Reset Some Settings to Default Future Release
6/24/2015 c04722045 Linux - HP NC-Series Broadcom tg3 Ethernet Driver for Linux Version 3.137e Generates Warning Messages "warn_slowpath_common" on Every Reboot of Red Hat Enterprise Linux 6 Future Release
6/24/2015 c04722042 HP Integrated Lights-Out 4 (iLO 4) - Unable to Change Asset Tag Value Using HP ProLiant HPONCFG Utility on HP ProLiant Gen8-Series and HP ProLiant Gen9- Series Servers With iLO 4 Future Release
6/24/2015 c04325462 (Revision) HP ProLiant Servers - HP Smart Array P212/P410/P410i/P411/P711m/P712m/P812 Controllers Configured with One or More Spare Drives and Firmware Version 6.40 (or Earlier) May Halt with "Lockup Code = 0xAB" Around 64, 128, or 256 Days Future Release
6/11/2015 c04491336 (Revision) HP Integrated Lights-Out -iLO 3 and iLO 4 - Login to iLO with an LDAP Account May Fail in an IPv4 and IPv6 Mixed Network Environment Future Release
6/9/2015 c04708924 HP Smart Update Manager (HP SUM) 6.x and 7.10 - Command Line Interface (CLI) Update of Virtual Connect Module or HP Onboard Administrator Reports Incorrect Exit Code When Modules Are Up-to-Date Future Release
6/8/2015 c04708785 Linux - HP System Health Application and Insight Management Agents (hpasmcli) Displays Incorrect Data Regarding Hyper Threading Status on HP ProLiant Gen9-Series Servers Running Linux and the HP Health (hp-Health) Version 10.10 Future Release
6/4/2015 c04704157 Red Hat Enterprise Linux 6 - HP QLogic P2/P3 Online Firmware Upgrade Utility for Linux May Cause Kernel Panic on Red Hat Enterprise Linux 6 Future Release
6/3/2015 c04703055 ProLiant DL360 Gen9 Server - HP Insight Diagnostics Online Edition Version 10.14.1575.0 Only Reports Information on One Processor Even When Multiple Processors Are Installed Future Release
5/7/2015 c04676362 Linux - Broadcom AHS Agent Daemon for HP ProLiant Servers (hp-tg3sd-1.0.13-1.i586.rpm) Does Not Install on Servers Running Red Hat Enterprise Linux 6.5 (x86) Future Release
5/7/2015 c04676410 HP ProLiant DL60 Gen9 and HP ProLiant DL80 Gen9 Server - Red Hat Enterprise Linux 7 (AMD64/EM64T) Does Not Boot With an HP Dynamic Smart Array B140i SATA RAID Controller Driver Version Earlier Than 1.2.2-115 Future Release
5/5/2015 c04674714 ProLiant Servers - Critical Overheat Condition May Occur on Systems Running HP Insight Diagnostics 10.26.1874 Extended Background Tests on SAS Hard Drives Future Release
4/30/2015 c04347716 (Revision) HP QLogic Fibre Channel Host Bus Adapters (HBA) - HP Firmware Online Flash Components for HP QLogic Fibre Channel HBAs for Windows and Linux Require the "Force" Option to Flash an Updated UEFI Driver Future Release
4/30/2015 c04183537 (Revision) HP ProLiant Servers - HP Intel E1R Driver Component for HP NC365T 4-Port Ethernet Server Adapters May Fail to Install on Systems Running Microsoft Windows Server 2012 R2 Future Release
4/23/2015 c04650005 HP ProLiant BL460c Gen9 Server or HP ProLiant WS460c Gen9 Graphics Server Blade- The System May Not Be Able to Detect SATA Hard Drives at POST or SATA Hard Drive Operation May Become Intermittent During Server Runtime Future Release
3/11/2015 c04595464 HP ProLiant Gen8 Server Blades - All Ports for the HP Ethernet 1Gb 4-port 366M Adapter May Not Display After Updating the Firmware Future Release
2/20/2015 c04578918 HP ProLiant DL360/DL380/DL388/ML350 Gen9 Servers - HP System Management Homepage Does Not Display the HP Dynamic Smart Array B140i Controller AND the HP Smart Array P440ar Controller (or HP H240ar Smart Host Adapter) at the Same Time Future Release
1/28/2015 c04557288 HP Smart Update Manager - VMware Components Will Not Be Selected to Install From Service Pack for ProLiant (SPP) When Using HP SUM 7.10 Future Release
1/14/2015 c04542689 ProLiant Gen9 Servers - SYSTEM ROM UPDATE REQUIRED to Prevent Memory Subsystem Anomalies on Servers With DDR4 Memory Installed Due to Intel Processor BIOS Upgrades Future Release
12/16/2014 c04529297 (Revision) SI Production - Autoloader Test 2 CA v2 (Source PI 55179) Future Release
12/4/2014 c04520194 HP ProLiant DL385 G7 Server: HP Emulex 82E 8Gb 2-port PCIe Fibre Channel HBA (AJ763B) - HP Service Pack for ProLiant (SPP) 2014.02.0 Running in Offline Mode May Become Unresponsive with a "127.0.0.1" Message Future Release
11/19/2014 c04459474 (Revision) HP Virtual Connect (VC) - Some VC Flex-10/10D Modules for c-Class BladeSystem May Shut Down When Running VC Firmware Version 4.20 or 4.30 Due to an Erroneous High Temperature Reading Future Release
10/14/2014 c04302261 (Revision) HP ProLiant Servers: HP Smart Array Controllers - DRIVER UPGRADE RECOMMENDED to Avoid an Out-of-Memory Condition and Purple Screen After Upgrading to hpsa Version 5.x.0.58-1 (VMware) or Version 3.4.4-125 (Red Hat Enterprise Linux) Future Release
9/17/2014 c04332584 (Revision) - HP Integrated Lights-Out 4 - FIRMWARE UPDATE REQUIRED: Intermittent Non-Maskable Interrupt (NMI) Events May Occur on ProLiant Gen8 Servers with HP Integrated Lights-Out 4 Firmware Versions 1.30, 1.32, 1.40 and 1.50 Future Release
9/5/2014 c04109116 (Revision) HP Insight Diagnostics 9.50 - Various Hard Disk Drive (HDD) Tests May Fail When Run on More Than 20 HDDs At a Time Through HP Intelligent Provisioning 1.50 or HP Service Pack for ProLiant (SPP) 2013.09.0 (B) Future Release
7/27/2014 c04383973 HP Network Adapter - Installation of HP Broadcom 1Gb Multifunction Drivers for Windows Server X64 Editions Component Version 7.8.50 (B) May Cause Black Screen After Reboot Future Release
7/23/2014 c04367683 (Revision) HP Service Pack for ProLiant (SPP) - HP ProLiant DL585 G7 and HP ProLiant BL685c G7 Servers Configured with an AMD Processor With Over 1 TB of Memory Are Unable to Boot to HP Service Pack for ProLiant (SPP) 2014.02 (or Earlier) Future Release
7/8/2014 c04367166 HP Insight Control server deployment- SOFTWARE UPDATE REQUIRED: Software for New Server Deployments Should Be Updated to Minimize Potential for Impact Due to "Heartbleed" Vulnerability Future Release
5/19/2014 c04222879 (Revision) SPP HOT FIX - HP ProLiant Gen8 Servers: FIRMWARE UPGRADE RECOMMENDED for HP Smart Array P220i, P222, P230i, P420i, P420, P421, P430, P431, P721m, P731m, P822, P830i, and P830 Controllers to Prevent/Correct a False Controller Failure Future Release
5/12/2014 c04103243 HP Insight Diagnostics - Insight Diagnostics Offline or Online Edition Version 9.50 (or Earlier) For Linux Reports Incorrect NC366i 2 Port Ethernet Server Adapter Firmware Version Future Release
5/2/2014 c04258304 (Revision) CUSTOMER ATTENTION REQUIRED: HP Broadcom-Based Network Adapters - Updating Comprehensive Configuration Management Firmware Version 7.8.21 on Certain Network Adapters May Result in the Network Adapter Becoming Nonfunctional Future Release
5/1/2014 c04184273 (Revision) SPP HOT FIX - HP ProLiant Gen8 Servers - DRIVER UPGRADE REQUIRED to Avoid NMI in Linux and VMware on HP ProLiant Servers Under Heavy Load and Low Memory with HP Dynamic Smart Array B120i / B320i Controllers Using Optional FBWC Future Release
4/11/2014 c03793656 (Revision) Windows Server 2012 and 2012 R2 - HP ProLiant Server May Blue Screen if Configured With an HP Smart Array Controller and the Windows Server 2012 HPCISSS2.SYS Driver Version 62.26.0.64 Future Release
3/27/2014 c03966729 (Revision) HP ProLiant Servers: HP Smart Array Controllers and SSDs - HP Smart Storage Administrator CLI Version 1.50.4.0 Will Be Unable to Set RAID or Cache Values if an Earlier Script Version Not Including the SSDSmartPath Command Is Used Future Release
3/26/2014 c04045904 (Revision) SPP HOT FIX - HP ProLiant Gen8 Servers - DRIVER UPGRADE REQUIRED to Ensure Cached Data in HP Dynamic Smart Array B120i/B320i Controllers with FBWC Is Written to Disk After a Bug Check and Crash Dump Under Windows Server 2008 or 2012 Future Release
3/18/2014 c04087094 HP ProLiant BL420c Gen8 Server Blade - Using HP Smart Update Manager 6.0.1 to Upgrade the VMware Power Manager Firmware Causes the Firmware Installation to Fail Future Release
3/18/2014 c04154757 HP Network Configuration Utility - HP Network Configuration Utility (NCU) for Windows Server Will Show Broadcom 1Gb Team Members Disabled if Broadcom 1Gb Driver Is Updated for an Existing Team Future Release
3/18/2014 c04154249 HP ProLiant DL380p Gen8 Server - Firmware Update on the Broadcom Network Adapters May Fail With "Segmentation Fault" Error Future Release
3/13/2014 c04198787 HP Service Pack for ProLiant 2014.02.0- HP SUM 6.2.0 May Report That the Firmware Is Up-To-Date Even if a Later Firmware Version Is Available Future Release
3/7/2014 c04174624 Linux - HP Smart Storage Administrator (HPSSA) for Linux 1.50.4.0 Does Not Automatically Start on Boot When Configured to Load as a Daemon With init.d Script Future Release
3/7/2014 c04174649 SUSE Linux Enterprise Server 11 SP2 and SP3 - iSCSI Target Disks Are Not Available After Upgrading to HP Emulex 10GbE iSCSI Driver (be2iscsi) Version 4.6.247.3 Future Release
2/18/2014 c04127099 HP ProLiant Servers - Upgrading HP H210i/H220/H220i/H221/H222 HBAs Using Online ROM Flash Component for Linux from Version 13.10.83.00 (or Earlier) to 13.10.113.00 Fails with an Erroneous "Component Firmware Version Is UpToDate" Message Future Release
1/27/2014 c04103189 HP Virtual Connect - After Upgrading Virtual Connect Firmware to Version 4.10 on a VC Domain that Contains VC Fibre Channel 8Gb/20 Port Modules, Some Server Blade HBAs May Fail to Log Back into the SAN Fabric with "Not Logged In" Message Future Release
1/24/2014 c03325226 (Revision) HP System Health Application and Command Line Utilities (Hp-Health) - Uncorrectable Memory Errors Are Not Detected During POST on HP ProLiant Gen8 Servers Running the Hp-Asrd Service Future Release
1/17/2014 c04087098 HP ProLiant ML310e Gen8 v2 and DL320e Gen8 v2 Servers - HP Dynamic Smart Array B120i and B320i Controllers May Not Be Detected by the HP Offline Array Configuration Utility Future Release
1/6/2014 c03747345 (Revision) SPP HOT FIX - HP Integrity, HP ProLiant, HP Storage Systems - FIRMWARE UPGRADE REQUIRED for Specific SAS Hard Drive Models to Prevent a Rare Data Compare Issue Future Release
10/31/2013 c03976732 (Revision) HP ProLiant DL580 G7 Server - The 07/01/2013 Revision of the System ROM May Cause Processor Throttling Future Release
10/18/2013 c03967466 Linux - Message Log Fills With Debug Messages on HP ProLiant Servers Running HP Agents and HP Provided ProLiant Smart Array Controller Driver for Linux (hpsa) Version 3.4.2-4 Future Release
10/18/2013 c03720433 (Revision) Linux - Cmanicd (NIC Agent) Packaged in the HP SNMP Agents (hp-snmp-agents) Version 9.30 (Or Earlier) Segfaults When SNMP V1 Linkup or Link Down MIB Traps Are Sent to HP ProLiant Server Running Red Hat Enterprise Linux 6 Future Release
10/14/2013 c03964262 HP D2200sb PCIe Storage Blade May Become Unavailable After Upgrading Partner Blade Server Using HP Service Pack for ProLiant Future Release
9/12/2013 c03928033 SPP Hot Fix - HP Service Pack for ProLiant (SPP) - CUSTOMER ACTION REQUIRED - ProLiant System ROM Components Included in HP Service Pack for ProLiant (SPP) Version 2013.09.0(B) Require a Power-Cycle After Installation Future Release
8/14/2013 c03650833 (Revision) HP ProLiant Servers - HP NC55x Network Adapters Using Firmware Older Than Version 4.1.450.7 May Experience Continuous Pause Frames Future Release
8/9/2013 c03787760 (Revision) Certain ProLiant Servers Running VMware - FIRMWARE UPDATE REQUIRED: Servers May Unexpectedly Reset, Experience a Machine Check, PCI Bus Error, or Purple Screen of Death (PSOD) Future Release
8/2/2013 c03883900 HP ProLiant Gen8 Servers - Online or Offline Firmware Upgrade of HP D2600/D2700 6Gb SAS Disk Enclosure Version 0146, 0147, and 0147(B) or Backplane Expander Firmware Version 2.16 or 2.16 (B) May Cause Inaccessible Volumes, Resulting in Data Loss Future Release
6/28/2013 c03755983 SPP Hot Fix - (Revision) HP ProLiant Servers - FIRMWARE UPGRADE RECOMMENDED to Prevent an HP Smart Array P220i/P420i Controller Halt During Power-On Self Test (POST) or Runtime with Lockup Code 0x13 and POST Errors 1783, 1719, 1793, or 1797 Future Release
6/11/2013 c03708135 (Revision) HP Virtual Connect - A Virtual Connect (VC) Mixed Environment With Single/Double Dense Servers Installed Will Leave Some Profiles Unassigned, Causing a Network Outage When Upgrading From VC FW 3.10-3.60 to VC FW 3.70-3.75 Future Release
6/4/2013 c03663726 (Revision) HP NC532m Dual Port Flex-10 10GbE Multifunction BL-C Adapter - MAC Address May Not Be Retained After a Firmware Upgrade Using a Version Dated in June (or Later) and the Adapter Will Display All Zeroes for the Port 1 MAC Address Future Release
5/23/2013 c03468137 (Revision) HP Servers and Storage Systems: Certain HP SAS and SATA Hard Drives - FIRMWARE UPGRADE REQUIRED to Prevent the Rare Potential for Drive Heads to Land on Data Areas of the Disk During Server Shut Down or Loss of Power Future Release
5/10/2013 c03759597 HP Ethernet 1Gb 4-port 33x Adapters - NMI May Occur Under Heavy Network Stress After Network Adapter Firmware Is Installed by HP Service Pack for ProLiant (SPP) Version 2013.02.0 Future Release
5/7/2013 c03757441 HP ProLiant DL-Series and ProLiant ML-Series Gen8 Servers - Integrated Lights-Out 4 Firmware Version 1.20 May Log Erroneous IML Entries After The Server Experiences Input Power Loss Future Release
5/1/2013 c03600027 (Revision) HP NC55X Adapters - FIRMWARE UPDATE REQUIRED: Device Control Channel (DCC) May Be Unavailable with a 10Gb Physical Link Future Release
4/29/2013 c03086891 (Revision) HP Onboard Administrator (OA ) - OA KVM Cannot Access HP Integrated Lights-Out 2 (iLO 2) Firmware Version 2.06 (or Later) Future Release
4/11/2013 c03734205 HP NC Network Adapters - Certain HP NC-Series Network Adapters May Experience Very Slow Bandwidth During Large File Transfers on Windows Server 2008 and Windows Server 2008 R2 Future Release
4/4/2013 c03604071 (Revision) HP ProLiant SL4545 G7 Server- System Will Stop Responding if HP SPP Version 2012.10.0 (or Earlier) Is Run in Offline Automatic Mode or the System ROM Is Downgraded Below Version A31 Dated 9/1/12 Future Release
4/3/2013 c03723487 Some HP ProLiant Servers- The Adapter May Stop Responding When Booting From iSCSI Using the Onboard Network Server Adapter After 1000 (or More) Login /Logout Sessions Future Release
3/21/2013 c03711985 SPP HOT FIX - HP ProLiant Servers: HP Emulex Converged Network Adapters (CNAs) - Access May Be Lost to Attached HP XP P9500, XP24000, or XP20000 Disk Array Channel Adapters (CHAs) and XP Disk Array Storage Future Release
3/20/2013 c03698772 (Revision) VMware ESXi 5.X and ESX/ESXi 4.X - SYSTEM ROM UPGRADE RECOMMENDED: Certain ProLiant BL/DL Servers With AMD Opteron 6200 Series-Processors Running VMware ESX/ESXi May Intermittently Encounter a Kernel Panic or PSOD Future Release
3/18/2013 c03659952 (Revision) HP ProLiant DL380x/ML350x Gen8 Servers: HP Brocade 41B, 42B, 81B, 82B Fibre Channel Host Bus Adapters - FIRMWARE UPGRADE RECOMMENDED to Avoid a Potential Server Halt During Power-On Self-Test with Brocade Firmware Version 3.0.3.4 Future Release
2/26/2013 c03684324 Linux - Automatic Server Recovery (ASR) Does Not Get Enabled Using HP System Management Homepage (HP SMH) on an HP ProLiant Server Running the HP SNMP Agents for Linux Version 9.25 (or Earlier) Future Release
2/25/2013 c03682782 SPP HOT FIX - HP ProLiant SL4545 G7 Server - the B110i Driver in RAID Mode May Cause a Stop To Be Displayed at "Examining Devices" During Red Hat Enterprise Linux 6.3 (x86_64) Installation if HP Smart Array P420i Controller Is Installed Future Release
2/21/2013 c03680086 HP Systems Insight Manager (HP SIM) - HP SIM 7.0 Will Not Install HP Service Pack for ProLiant Version 2012.02.0 in Offline Mode on ProLiant Gen8 Series Servers With an HP Flex-10 10Gb 2-Port 530FLB Adapter and Less Than 4 GB of System RAM Future Release
2/19/2013 c03676308 HP Smart Update Manager for Linux Version 5.2.0 - HP SUM May Display Certain Component Installation Results as "Update Returned an Error" Future Release
2/1/2013 c03659073 HP c-Class BladeSystem -Standby Onboard Administrator (OA) Modules May Not Respond to SNMP Data Requests Future Release
1/24/2013 c03581886 (Revision) HP Emulex FCoE Windows Driver - SPP HOT FIX: Smart Components, cp016937.exe and cp016930.exe Do Not Install the Emulex ElxPlus Driver Future Release
12/21/2012 c03612934 ProLiant G7 and Gen8 Servers- System ROM UPDATE RECOMMENDED to Minimize the Potential for a Server to Suddenly Reboot or Fail to Boot Future Release
12/5/2012 c03599040 HP ProLiant DL360e Gen8 Server - Servers Configured With a Version of the System ROM Dated Earlier Than 8/20/12 May Fail to Boot or May Display a Red Screen When Attempting to Boot Linux Future Release
12/5/2012 c02964542 (Revision) HP ProLiant and HP StorageWorks Systems: HP NC375i, NC375T, NC522m, NC522SFP, NC523SFP, CN1000Q Network Adapters - FIRMWARE UPGRADE REQUIRED to Avoid the Loss and Automatic Recovery of Ethernet Connectivity or Adapter Unresponsiveness Future Release
12/4/2012 c03597945 Linux - HP Agentless Management Service (hp-ams) Seg-Faults or Generates Floating Point Exceptions (FPE) When Logging Periodic CPU Performance Data to the Active Health Service (AHS) Future Release
11/29/2012 c03366448 (Revision) HP Integrated Lights-Out 3 (iLO 3) - False iLO 3 Status of "Not Responding" May Be Intermittently Reported in HP System Management Homepage and HP Systems Insight Manager (HP SIM) Future Release
11/20/2012 c03581836 HP Emulex FCoE Windows Driver - SPP HOT FIX: Smart Components, cp016937.exe and cp016930.exe, Do Not Install the Emulex ElxPlus Driver Future Release
11/14/2012 c03571808 ProLiant Gen8-Series Servers - Servers with Integrated Lights-Out 4 (iLO 4) - Server May Not Power On Automatically After an ASM Reset Is Invoked Future Release
11/9/2012 c03069000 (Revision) Onboard Administrator - The Onboard Administrator (OA) Page Fails to Populate the ProLiant Server Blade With the HP Virtual Connect Flex-10 10Gb Ethernet Module Information After the OA Is Reset Future Release
9/27/2012 c03507210 ProLiant Gen8-Series AMD Servers -SYSTEM ROM UPDATE RECOMMENDED: Servers Configured With 32GB LRDIMMs May Exhibit Erroneous Thermal Shutdown Messages in the Integrated Management Log (IML) Future Release
9/26/2012 c03507322 SPP HOT FIX - Certain ProLiant Gen8-Series Servers - ECC Threshold Exceeded Memory Events May Occur with 32 GB LRDIMMS Future Release
8/16/2012 c03250482 (Revision) SPP HOT FIX - ProLiant DL385 G7, ProLiant DL585 G7, ProLiant BL465 G7, ProLiant BL685 G7 Server Configured with AMD Opteron 6100-Series Processors - System May Reboot Without Warning and May Not Log an IML Event Future Release
8/7/2012 c03280665 (Revision) Linux - Running Hp-Health, Hp-Snmp-Agents, and Hp-Ams Will Consume All Eight Available HP Integrated Lights-Out 4 (HP iLO 4) Channels, Preventing Other Applications From Communicating With HP iLO 4 Future Release
8/6/2012 c03446504 HP Insight Management Agents 9.10- Event ID 1182 for SNMP Trap 11020 May Be Reported Multiple Times in the Windows Event Viewer Whenever a Change to the Overall Health Status of the Server Occurs Future Release
7/27/2012 c03435786 HP ProLiant G7 Servers - Servers Configured with AMD Opteron 4100,4200,6100 or 6200-Series Processors May Experience Certain PCI Express Errors that Result in System Unresponsiveness But the Errors Are Not Logged in the IML as Expected Future Release
7/26/2012 c03395976 (Revision) HP Virtual Connect - The VC 3.60 Firmware Upgrade Fails to Complete Successfully and Virtual Connect Support Utility (VCSU) Times Out When Updating From VC Firmware 3.18 (Or Earlier) to VC Firmware 3.60 Future Release
7/17/2012 c03418050 HP System Management Homepage (SMH) 7.1.0 - User Login May Fail on Some Non-English Language Versions of Windows Future Release
7/17/2012 c03418051 HP ProLiant Servers - FIRMWARE UPGRADE RECOMMENDED to Avoid a 1783 Error During Power-On Self-Test (POST) After Adding an HP SAS Expander and Attaching it to an HP Smart Array P410/P410i Controller Future Release
7/4/2012 c03400156 HP Converged Network Adapters - Firmware update required for network adapters to avoid FCoE multipath recovery issues Future Release
6/29/2012 c03395862 Windows Server 2008 - When the HP ProLiant Dynamic Smart Array RAID Controller Driver for Windows Server 2008 Is Installed on ProLiant Servers With 4-Core Processors the Installation Process May Take Up to Five Hours to Complete Future Release
6/29/2012 c03395860 Windows Server 2008 - The HP ProLiant Dynamic Smart Array RAID Controller Driver for Windows Server 2008 May Cause a Blue Screen to Occur If Transferring a Large Amount of Data When There Is a 512MB FBWC Module Installed Future Release
6/15/2012 c03378695 HP ProLiant Gen8 Servers- Servers Utilizing Two Intel Xeon E5-2600 Series Processors and with the 12/21/2011 Revision of the System ROM May Source Uncorrectable Memory Errors Incorrectly when Node Interleaving Is Enabled in RBSU Future Release
6/8/2012 c03367807 HP ProLiant BL460c Gen8 Server - "1798-Slot 0 Drive Array - Array Accelerator Self-Test Error Occurred. Array Accelerator Is Disabled" Message Displayed if the Server Is Booted Without the Smart Array P220i Controller NAND Flash Module Installed Future Release
6/7/2012 c03365221 HP ProLiant BL460c Gen8 Server - The HP ProLiant BL460c Gen8 Server Is Not Properly Cooled After a Firmware Upgrade of the System ROM From Version 2011.12.21 to Version 2012.2.21 (or Later) and Using OA Firmware Version 3.55 (or Earlier) Future Release
6/5/2012 c03362107 Brocade 804 8Gb Fibre Channel HBA for HP BladeSystem c-Class- Adapter May Experience a Brief Loss of Fabric Connection on All Ports Future Release
5/25/2012 c03350017 HP ProLiant Gen8 Servers - Servers Utilizing Intel Xeon E5-2600 Series Processors and Configured with the 12/21/2011 Revision of the System ROM May Intermittently Be Unable to Boot Certain Legacy USB Devices Future Release
5/25/2012 c03350045 Smart Array P410, P410i or P212 Controller - The Server May Stop Responding With the Message, "1783 -Slot 0 Drive Array Controller Failure" After Upgrading the Smart Array Firmware Future Release
5/24/2012 c03346558 (Revision) Certain ProLiant Servers - SYSTEM ROM UPGRADE REQUIRED to Prevent Unpredictable System Behavior in ProLiant Servers Configured with Intel Xeon 7500-Series or Intel Xeon E7-Series Processors Future Release
5/22/2012 c03343902 HP Smart Array Controllers - Smart Array P410, P410i, or P212 Zero Memory Controllers Running Firmware Version 5.06 or 5.12 May Stop Responding During Controller Initialization and Display Error Code 0x15 When Running Diagnostic Tests Future Release
5/4/2012 c03316637 Linux - HP NC Series Broadcom 1/10 Gbe iSCSI Offload Driver for Linux (Hp-Netxtreme2-Iscsi) Does Not Build on SUSE Linux Enterprise Server 10 Using HP Smart Update Manager (HP SUM) Future Release
5/3/2012 c03315527 HP ProLiant Servers: HP Smart Array P212, P410, P410i, P411, P712m, and P812 Controllers - HP Insight Management Agents for Windows Server Version 8.70.0.0 (or Earlier) Do Not Log Capacitor Failures for Flash-Backed Write Cache (FBWC) Future Release
5/3/2012 c03315847 Certain HP ProLiant G7 Servers- SYSTEM ROM UPDATE RECOMMENDED: Servers Utilizing Intel Xeon 7500-Series or Intel Xeon E7-Series Processors With the 11/04/2011 System ROM May Intermittently Experience Unavailable PCI-Express Devices on Warm Boots Future Release
5/1/2012 c03188864 (Revision) HP ProLiant BL680c G7 and BL620c G7 (I25) Server Blades with Intel Xeon CPU E7-Series Processors - FIRMWARE UPGRADE REQUIRED to Prevent Server Unresponsiveness During Power-On Self-Test After Upgrading to System ROM Version 2011.02.19 Future Release
4/25/2012 c03306319 HP ProLiant Servers and Storage Systems - FIRMWARE UPGRADE REQUIRED to Ensure That Certain HP SAS Hard Drive Models Do Not Encounter a Rare Condition in Which Unexpected Data is Written to the Drive Cache Future Release
4/24/2012 c03301853 Support Pack for ProLiant (SPP) on Linux - The Server May Stop Responding When Configured with 2 GB of Memory if an HP Flex-10 10Gb 2-port FLB Adapter Is Installed and Its Two Physical Ports Are Fully Flexed Out into Eight Virtual Functions Future Release
4/20/2012 c03294444 HP ProLiant Gen8 Servers - CUSTOMER ACTION RECOMMENDED: HP ProLiant Gen8 Servers Using Intel Xeon E5-2600 Series Processors and with a System ROM Revision Date of 12/21/2011 Should Update to a Later Version Future Release
4/20/2012 c03294663 ProLiant SL230s Gen8 and HP ProLiant SL250s Gen8 Servers -The Removable Media Boot Sequence Option in the ROM-Based Setup Utility (RBSU) May Not Function Properly on an HP ProLiant SL230s Gen8 or HP ProLiant SL250s Gen8 Server Future Release
4/19/2012 c03291694 HP ProLiant Gen8 Servers - The System ROM Revision Dated 12/21/2011 May Not Be Able to Achieve the Maximum Performance Benefit of Intel Turbo Mode With Processors Rated at 115 Watts (or Higher) Future Release
4/19/2012 c03291696 HP ProLiant Gen8 Servers - HP ProLiant Gen8 Servers Using Intel Xeon E5-2600 Series Processors With the System ROM Release Dated 12/21/2011 May Not Achieve Maximum Performance Benefits With Advanced Encryption Standard (AES) Set to Disabled Future Release
4/18/2012 c03289537 HP NC55x Network Adapter - Red Hat Enterprise Linux Installation May Stop Responding When HP ProLiant Server Is Configured With an HP NC55x Network Adapter Running Firmware Version 4.0.360.15 Future Release
4/18/2012 c03289538 HP Smart Array Controllers - the Kdump Facility May Halt With Certain Smart Array Controllers When Attempting to Use the Kdump Facility With SUSE Linux Enterprise Server 10 Future Release
4/13/2012 c03283264 HP BladeSystem PCI Expansion Blade- Expansion Blade Configured with Certain PCI Option Cards May Not Power On in an HP BladeSystem c3000 or c7000 Enclosure Future Release
4/13/2012 c03283265 HP ProLiant DL160 Gen8 Server - Integrated Lights-Out 4 (iLO 4) May Display DIMM Temperature Status Incorrectly for Processor 2 DIMM Sockets Future Release
4/11/2012 c03280781 HP ProLiant Smart Array Controller - "Tofu Enable" Message Displayed When Flashing the Smart Array Controller Firmware Version 5.14 Using the Linux Online Flash Utility in Forced Mode on HP ProLiant G5-Series and HP ProLiant G6-Series Servers Future Release
4/4/2012 c02720236 (Revision) HP ProLiant BL465c G7 and BL685c G7 Server Blades: HP NC360m/NC364m 1GbE Adapters - HP Virtual Connect Assigned MAC Addresses Are Not Retained and Virtual Connect Enabled PXE Boot Does Not Function Future Release
4/2/2012 c02494461 (Revision) ProLiant Servers - A Windows Application Error Message Will Be Logged During the Initial Installation of Insight Management WBEM Providers for Windows Version 2.7.0.0 or 2.8.0.0 Future Release
3/30/2012 c03264171 HP SUM (HP Smart Update Manager)- The Error "Unable to Run Component" for the HP NC-Series Online Firmware Upgrade Utility May Be Displayed During Online Firmware Flash Future Release
3/30/2012 c03264765 SUSE Linux Enterprise Server 10 (X86) SP4 - Xen Will Not Boot on HP ProLiant Gen8-Series Servers Configured With an H200-Series SAS2 HBA Future Release
3/30/2012 c03265130 HP System Health Application and Command Line Utilities for Linux - HPASMCLI Is Unable to Change the Status of Hyper-Threading on HP ProLiant G7-Series or ProLiant Gen8 Series Servers Future Release
3/28/2012 c03234658 HP Onboard Administrator (OA) - The Onboard Administrator Firmware Version 3.50 May Not Support a Single Sign-On to iLO 2 on HP ProLiant G1, G5, or G6-Series Server Blades When LDAP Authentication Is Used With Certain Username Syntaxes Future Release
3/26/2012 c03255219 Certain HP ProLiant G7-Series Servers- Systems Configured with AMD Opteron 6200-Series 4-Core Processors Require a Minimum System ROM Version Future Release
3/26/2012 c03246192 Onboard Administrator and Virtual Connect - HP ProLiant BL460c Gen8 Server Blades Require Onboard Administrator Firmware Version 3.50 (or Later) and Virtual Connect Firmware Version 3.51 (or Later) Future Release
3/26/2012 c03255223 Certain ProLiant Servers-When the Minimum Processor Idle State Is Configured to Core 6 on AMD-Opteron 6200-Series Processors and the Server Is Running a System ROM Dated 12/31/2011 (or Earlier), the Processor Cores Will Not Enter the C6 State Future Release
3/16/2012 c03246354 HP Ethernet 1Gb 4-Port 33x Adapter - "Failed to Write NVRAM!" Message Is Displayed When Attempting to Update Network Adapter Firmware Using a TG3 Driver Earlier Than Version 3.117j That Is Packaged With a Linux Distribution Future Release
2/29/2012 c03229239 ProLiant DL580 G7, ProLiant DL980 G7,ProLiant BL620 G7, and ProLiant BL680 G7 Servers- False Temperature Spikes May Be Observed on Servers With HP Integrated Lights-Out 3 (iLO 3) Firmware Versions Prior to Version 1.28 Future Release
2/17/2012 c03186620 (Revision) HP ProLiant SL390s G7 Server - Integrated Lights-Out 3 (iLO 3) FIRMWARE UPGRADE REQUIRED to Prevent the Server From Continuously Rebooting and Displaying "Power Management Controller Needs to Be Re-Flashed" Message During POST Future Release
2/17/2012 c03213696 HP ProLiant SL390s G7 Server - Integrated Lights-Out 3 (iLO 3) FIRMWARE UPGRADE REQUIRED to Prevent Unexpected Server Shutdowns, False CPU Clock Throttled Messages, or Incorrect Values Displayed via the PPIC Command Future Release
2/13/2012 c02914393 (Revision) ProLiant Servers - SYSTEM ROM UPGRADE REQUIRED to Increase System Availability and Reliability for HP ProLiant G6 and G7 Servers Configured with Intel Xeon 5500-Series or Intel Xeon 5600-Series Processors Future Release
1/10/2012 c03128266 (Revision) HP ProLiant/StorageWorks/Integrity Systems - FIRMWARE UPGRADE REQUIRED to Ensure That Certain HP SAS Solid State Drive Models Do Not Encounter a Rare Condition in which Invalid Data Is Written to the Drive Future Release
1/6/2012 c03014078 (Revision) HP ProLiant Servers - FIRMWARE UPGRADE RECOMMENDED for Specific SAS Hard Drives to Prevent "1716-Slot [x] Drive Array - Unrecoverable Media Errors" Message During Power-On Self-Test on HP Smart Array Controllers Using Zero Memory RAID Future Release
12/21/2011 c03011446 (Revision) HP ProLiant Servers - FIRMWARE UPDATE REQUIRED for Certain SATA Hard Drives Models to Prevent a Potential Data Transfer Issue when Attached to Smart Array P212, P410, P410i, P411, P711m, P712m, and P812 Controllers Future Release
12/21/2011 c03083515 HP ProLiant Servers - FIRMWARE UPDATE RECOMMENDED for Smart Array P212/P410/P410i/P411/P711m/P712m/P812 Controllers to Prevent Server Serial Number, Product ID, and Other Configuration Settings From Being Unexpectedly Cleared or Reset to Default Future Release
12/14/2011 c03091300 (Revision) HP QLogic P3 Online Firmware - The HP QLogic P3 Online Firmware Upgrade Utility for Windows Server 2003/2008 May Fail With a "Dependency Failed" Error Message Future Release
12/9/2011 c03116660 HP QLogic P3 Online Firmware Upgrade Utility for Windows Server 2003/2008 - the Firmware Upgrade Utility Version 1.3.9.0 May Fail to Upgrade the Firmware Future Release
11/18/2011 c03081364 (Revision) HP ProLiant/StorageWorks/Integrity Systems - FIRMWARE UPGRADE REQUIRED to Ensure That Certain HP SAS Hard Drives Are Not Susceptible to a Potential Condition Which Can Result in Stale Data Being Sent to the Controller Future Release
10/21/2011 c03065184 SYSTEM ROM UPGRADE REQUIRED: ProLiant Servers Running VMware ESX/ESXi 4.x (or Later) May Intermittently Encounter a System Reset or Purple Screen Message, "PCPUx Locked Up, Failed to ACKTLB Invalidate" Future Release
7/21/2011 c02914486 (Revision) ProLiant Servers - SYSTEM ROM UPGRADE REQUIRED - HP Advanced Memory Error Detection Technology Increases Server Uptime and Is Available Via the May 2011 (or Later) System ROM Upgrade for Certain HP ProLiant G6 and G7 Servers Future Release
7/18/2011 c02838375 (Revision) ProLiant G2, G5 and G6 Servers - After Upgrading to the May 2011 (or Later) Revision of the System ROM, Special Steps Must Be Performed if it Is Necessary to Downgrade the System ROM to Revisions Earlier Than May 2011 Future Release
7/11/2011 c02914394 Certain ProLiant G6-Series Servers- SYSTEM ROM UPGRADE REQUIRED for ProLiant G6 Servers Configured with Intel Xeon 5500-Series Processors, Intel Xeon 5600-Series Processors, or Intel Xeon 3500-Series Processors Future Release
7/11/2011 c02914487 Certain ProLiant G7-Series Servers- SYSTEM ROM UPGRADE REQUIRED for Certain ProLiant G7-Series Servers Configured with Intel Xeon 5500-Series Processors or Intel Xeon 5600-Series Processors Future Release

There are no Open CAs to report at this time.

Known Limitations

Date CA Number Description
9/13/2019 a00036618 (Revision) Linux - Both the Mellanox OFED or Mellanox Ethernet + RoCE driver and the Broadcom / QLogic RoCE Ethernet Drivers Will Not Load on an HPE ProLiant System
4/2/2019 a00069759 HPE Network Adapters - Firmware Upgrade May Fail for Certain HPE Intel Network Adapters In SUSE Linux Enterprise Server 12 SP4 Or SUSE Linux Enterprise Server 15 With Secure Boot Enabled
11/2/2018 a00059710 HPE Network Adapters - Unsupported VMware Mellanox Firmware Smart Components Get Selected For Deployment On ProLiant Gen10 Servers With VMware ESXi 6.0/6.5 and Configured With Certain Network Adapters During Remote Online Deployment Using SUM
7/12/2018 a00051588 HPE ProLiant Gen7 Servers - On Systems Running VMware vSphere 6.0 And Configured With Certain Network Adapters, The HPE QLogic NC382i/NC532x Online Firmware Upgrade Utility for VMware Version 1.15.1 Displays as Selected at Every SUM Launch
5/7/2018 a00046664 HPE MSA Storage - New HPE MSA Best Practices Part 1 - Controller Firmware
11/6/2017 a00030192 HPE Network Adapters - Mellanox Ethernet + RoCE And OFED Driver Installation Conflicts With Broadcom NetXtreme-E Driver On HPE ProLiant Servers Running SUSE Linux Enterprise Server 12 SP3 (Or Later) And Configured With Certain Network Adapters
7/29/2017 a00020829 HPE OneView - OneView Reports "The Firmware Bundle Information Is Unavailable" When Uploading the Service Pack for ProLiant 2017.07.1 (or Later)
6/5/2017 a00016852 VMware - HPE ProLiant Servers Configured With Certain Network Adapters, And Running The HPE VMware ESXi 6.5 Custom Image With The Inbox ixgbe Driver v4.1.1.4 Shipped In November 2016 and May 2017 Do Not Function When Connected To a 1Gb Switch
7/23/2014 c04367683 (Revision) HP Service Pack for ProLiant (SPP) - HP ProLiant DL585 G7 and HP ProLiant BL685c G7 Servers Configured with an AMD Processor With Over 1 TB of Memory Are Unable to Boot to HP Service Pack for ProLiant (SPP) 2014.02 (or Earlier)
2/21/2013 c03680086 HP Systems Insight Manager (HP SIM) - HP SIM 7.0 Will Not Install HP Service Pack for ProLiant Version 2012.02.0 in Offline Mode on ProLiant Gen8 Series Servers With an HP Flex-10 10Gb 2-Port 530FLB Adapter and Less Than 4 GB of System RAM

Expand below for information regarding SPP Documentation, SPP Update Compatibility, and Associated Web Pages and Documents.

 
SPP Documentation
Hotfix Matrix
SPP Update Compatibility
Associated Web Pages and Documents

Post-Production SPP

What is a Post-Production SPP and why is HPE separating the SPP into a production and generation specific Post-Production SPPs?

See Reducing Server Updates.

Which SPP should I use?
Server Generation Classification SPP to Use
Gen10 and Gen9 Production Latest Version
Gen8 Post-Production Gen8 Post-Production
G7 Post-Production G7 Post-Production
G6 and Older Post-Production Use the last SPP that contained the drivers and firmware for your server model(s).
What is the support life for the Gen8 and G7 Post-Production SPP?
Post-Production SPP Support Life
Gen8 Ends when HPE no longer supports the Gen8 server models
G7 End when HPE no longer supports the G7 server models
Will HPE release any future component updates for the Gen8 and G7 servers?

Yes, Gen8 and G7 component updates will be released as “Hot Fixes” (against the Gen8 and G7 Post-Production SPPs) to address security vulnerabilities and fix issues (on an as needed basis).

How will I know if a “Hot Fix” has been released against the Gen8 or G7 Post-Production SPP?
Post-Production SPP Where will future Hot Fixes be listed?
Gen8 Gen8 page - "Hot Fixes & Advisories" tab
G7 G7 page - "Hot Fixes & Advisories" tab
Can I download the Gen8 or G7 Post-Production SPPs with all of the “Hot Fixes” already included?

Yes, by downloading the “Full SPP” from the SPP Custom Download.

How do I download the Gen8 and G7 Post-Production SPPs?

The preferred mechanism for downloading production and Post-Production SPPs is the SPP Custom Download. The Post-Production SPPs are also available for download from the SPP Download Page and HPE Support Center.



SPP Custom Download

What do I need to know about creating a bootable ISO for offline use?

When booting the SPP for offline installs, only Linux firmware will be installed. The recommended filter settings for creating a bootable ISO for offline use are

  • Component Types - Firmware
  • Operating Systems - All versions of RHEL and SLES
All other filter settings may be used to include additional components to the iso for later use in online mode.

Does the Custom Download check for component installation dependencies?

No. Prior to using SPP Custom Download, please check component information to ensure dependencies are met BEFORE customizing the download. Please note, SUM does dependency checking during the installation phase. If dependencies are not met, SUM will notify that there are missing dependencies at installation time.

How do I download from the SPP Custom Download page?
  • Click on SPP Custom Download link
  • Select the appropriate SPP
  • Hover over the pre-built or Base SPP tile
  • Click on the Download icon at the bottom right to start download
  • If the browsers offers to save or open, select save
How do I create my own download?
  • Click on SPP Custom Download link
  • Select the appropriate SPP
  • Click on the "Create a new bundle" tile (plus sign tile)
  • Complete the "Configure Your Bundle" step with the applicable information of your choice and press "Next: Select Filters" button
  • Select filters as needed (no selection in any given category means everything in that category will be included)
  • Click the "Build" button
  • Preview selected components and click "Submit Build" button
  • Upon submission the build request is queued and will be processed as soon as possible
  • Build completion is indicated on the new tile or through email notification, if selected
How does a filter work?

SPP Custom Download presents a list of the most common keywords listed by the components in the system.

  • Choosing not to filter the results based on a category means that no restrictions are made for that category (e.g. no choices in the “Operating Systems” category means that all OSes will be included
  • In some cases, components fail to specify keywords in a section and then only match if the section is unfiltered.
  • In a section “no selection” MEANS “no filter”

Can I do offline installs with my customized download?

Yes. For best offline results, select all Linux operating systems.

My offline install shows no applicable components. What happened?

Linux was not included in the created download. The offline environment is Linux based and therefore requires Linux components.

How do I get SPP Custom Download?

There is nothing to download. SPP Custom Download is an online service for filtering and downloading the SPP.

What output formats are available?

SPP Custom Download can produce .zip and .iso formatted files.

Are the .iso files bootable?

SPP Custom Download offers the option to include a boot environment or to make a smaller package by excluding the boot environment.

Are SPP Custom Download generated payloads compatible with SUM?

Yes. SPP Custom Download generated deliverables are generated with the SUM custom baseline engine.

Does SPP Custom Download replace SUM Custom Baseline?

No. SPP Custom Download offers a way for the user to filter the SPP before downloading. SPP Custom Download also is restricted to only offer combinations based on a single SPP and its supplements in order to retain the "tested together" results.

Why are filter choices available that don't belong to the SPP that I selected?

Filter options shows the combination of filters appropriate for the set of SPPs currently carried on the SPP Custom Download service. Doing this allows a customer to create a set of filters that they can save and later re-use on several different SPP versions.



General

How do I find the latest SPP for an old OS/hypervisor version (e.g. Windows 2008) whose components are no longer on the SPP?

Use the new SPP OS Guide

What is the difference between SPP Online and SPP Offline Mode?
  • Online mode - Runs on a Windows® or Linux hosted operating system
  • Offline mode - Server boots to the SPP ISO (Bootable ISO only)
    Offline Automatic mode - Firmware components update without interaction
    Offline Interactive mode - Onscreen instructions guide the user to update firmware components
How does SPP relate to Smart Update?

Smart Update, https://www.hpe.com/info/smartupdate, is the umbrella technology that encompasses several products, including both SUM and the SPP. The Smart Update website serves as a “one-stop shop” portal for SUM and the SPP, as well as other products.

What is the difference between SPP and SUM?

The SPP is a delivery mechanism for the firmware and software components for ProLiant servers, options, and the HPE BladeSystem infrastructure, including enclosure components. SUM is the deployment tool used to plan, schedule, and deploy the components delivered with the SPP.

What determines when an SPP is released?

SPP releases are driven by major ProLiant server releases, which occur several times a year. Although driven by the server releases, an SPP may not be released with every ProLiant server release. An SPP may also be released outside of a server release, so exceptions occur to the SPP’s delivery cycle alignment with major ProLiant server releases.

Last revised: Monday, October 26, 2020