At the AP level
This page enables you to define configuration settings for all radios on the AP. See Radio templates table edit for descriptions of all configurable parameters.
At the controller and group level
This page shows all radios that are configured on all controlled APs. For each radio, the supported wireless mode is shown along with the current operating mode: AP, Local Mesh, AP/Local Mesh, Monitor, Sensor, or Disabled.
-
If you are viewing this page at the controller level, then the templates that you define on this page are applied to all APs in all groups.
-
If you are viewing this page at the group level, then the templates that you define on this page are applied to all APs in the group.
Radio table
For information on using table features to view and edit settings, see Working with tables.
-
Model: AP model number.
-
Radio 1: Indicates the operating mode (as an icon), and the wireless modes that are active on this radio.
-
Radio 2: (On APs that have two radios.) Indicates the operating mode (as an icon), and the wireless modes that are active on this radio
-
Radio 3: (On APs that have three radios.) Indicates the operating mode (as an icon), and the wireless modes that are active on this radio
-
Inheritance: (Group level only). Indicates that settings are inherited from the controller level.
-
Applies to APs: Indicates the number of APs that are using these settings. Hover over the magnifying glass icon to see a list of APs.