Storage: Block Storage Drivers > Edit Block Storage Drivers

  

 next

Edit Block Storage Drivers

Use this procedure to edit block storage driver attributes.

Prerequisites 

  • Minimum required privileges: Infrastructure administrator

  • You must have connectivity from the targeted compute node to the 3PAR storage system iSCSI port when editing an iSCSI driver. If you do not configure the connection, block storage volumes will not attach to virtual machine instances.

Editing a block storage driver

  1. From the main menu, select Block Storage Drivers.

    The Block Storage Drivers overview screen is displayed.

  2. Select Actions→Edit.

    The Edit Block Storage Driver screen is displayed.

  3. Edit the information in the General section.

  4. Edit the information in the Storage System Access section.

  5. Edit the information in the Details section.

  6. To save the changes, click Save.

  7. Verify that the changes are displayed on the Block Storage Driver overview screen. Click the Name column heading to sort the block storage drivers by name. 

See also

prev

 

up

 next

Add Block Storage Drivers 

home

 Delete Block Storage Drivers

Copyright © 2014 Hewlett-Packard Development Company, L.P.