The difference between HPE Moonshot iLO Chassis Management Firmware and HPE iLO 4
Moonshot iLO CM firmware is derived from HPE Integrated Lights-Out (iLO 4) firmware and the hardware it is hosted on (the Moonshot 1500 CM module) uses four iLO processors. The Moonshot iLO CM provides remote management and control (designed specifically for hyper scale environments), but just as Moonshot is different in many ways from a traditional ProLiant, the Moonshot iLO CM is different from iLO. Comparison of Moonshot iLO CM firmware to HPE iLO 4 highlights some differences based on current firmware versions.
Comparison of Moonshot iLO CM firmware to HPE iLO 4
Feature |
Moonshot iLO CM v1.51 |
iLO 4 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
System affinity |
45 cartridges |
One server | ||||||||||
Management |
|
| ||||||||||
Health |
Cartridge and chassis monitoring |
Active Health System | ||||||||||
Provisioning |
HPE Cluster Management Utility and PXE (boot from network) |
HPE Intelligent Provisioning HPE CMU PXE | ||||||||||
Remote Support |
IPMI over LAN |
IPMI over LAN HPE Embedded Remote Support | ||||||||||
Remote Console |
Virtual Serial Port host-based (in band) Integrated Remote Console with mRCA cartridge |
Virtual Serial Port host-based (in-band) Integrated Remote Console (OOB) | ||||||||||
Media |
Network-based to host |
Network-based to host Virtual Media | ||||||||||
Interface |
SSH and serial IPMI over LAN HPE APM Browser |
SSH and serial IPMI over LAN Browser Scripting (RIBCL) | ||||||||||
Authentication |
Local users LDAP |
Local Users LDAP Kerberos 2-factor HPE-SIM Single Sign-On | ||||||||||
Power Management |
Consumption monitoring |
Consumption monitoring Power Capping Power Regulator for ProLiant | ||||||||||
Network |
IPv4 |
IPv4 IPv6 (phase 1) |