Install the PCI riser cages

CAUTION: To prevent damage to the server or expansion boards, power down the server, and disconnect all power cords before removing or installing the PCI riser cage.

To install the component:

1. If cabled expansion boards are installed on the PCI riser cage, connect all necessary internal cabling to the expansion boards.

   For more information on these cabling requirements, see the documentation that ships with the option.

2. Align the riser board with the corresponding connectors on the system board, and then press down the PCI riser cage.
3. Push down the release tab, rotate it 180° clockwise, and then press it flat on the PCI riser cage.
   • Primary PCI riser cage

     

   • Secondary PCI riser cage

     

4. Install the access panel.
5. Do one of the following:
   • Slide the server into the rack.
   • Install the server into the rack.
6. Power up the server.