Previous Topic

Next Topic

Serial cable option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure. Improper grounding can cause ESD.

  1. Back up all server data.
  2. Power down the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the serial cable blank.

    Removing the serial cable blank (DL360 Gen9)

  6. Connect the serial cable option. Then, remove the backing from the double-sided tape and press down where indicated.

    Connecting the serial cable (DL360 Gen9)