FlexibleLOM option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure. Improper grounding can cause ESD.

1. Back up all server data.
2. Power down the server.
3. Do one of the following:
   • Extend the server from the rack.
   • Remove the server from the rack.
4. Remove the access panel.
5. Remove the FlexibleLOM PCIe blank.

   

6. Install the component:
   1. Firmly seat the FlexibleLOM in the slot.
   2. Tighten the thumbscrew.

      

7. Install the access panel.
8. Slide the server into the rack.
9. Connect the LAN segment cables.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server.