The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with the access panel installed.
Item |
Description |
Status |
---|---|---|
1 |
Power cap |
Off = System is in standby, or no cap is set. Solid green = Power cap applied |
2 |
NIC link/activity |
Off = No link to network. If the power is off, view the rear panel RJ-45 LEDs for status. Flashing green = Network link and activity Solid green = Network link |
3 |
AMP status |
Off = AMP modes disabled Solid green = AMP mode enabled Solid amber = Failover Flashing amber = Invalid configuration |
4 |
Over temp |
Off = Normal Solid amber = High system temperature detected |
— |
All other LEDs |
Off = Normal Amber = Failure For more information on the activation of these LEDs, see "Systems Insight Display LED combinations." |