Previous Topic

Next Topic

Power supply backplane

WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. Pressing the Power On/Standby button does not shut off system power completely. Portions of the power supply and some internal circuitry remain active until AC power is removed.

To remove the component:

  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Remove all power supplies.
  4. Extend the server from the rack.
  5. Remove the access panel.
  6. Remove the power supply backplane.

    Removing the power supply backplane

To replace the component, reverse the removal procedure.