Primary two-slot PCI riser cage option
To install the component:
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Extend the server from the rack.
- Remove the access panel.
- Remove the standard PCI riser cage from the primary slot.
- Remove the blank from the optional 2-slot PCI riser cage.
- Install an optional expansion board into the PCI riser cage.
- Install the optional 2-slot PCI riser cage.
- Install the access panel.
- Slide the server into the rack.
- Connect each power cord to the server.
- Connect each power cord to the power source.
- Power up the server.