Previous Topic

Next Topic

Extend the server from the rack

WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack.

WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

To extend the server from the rack:

  1. Pull down the quick-release levers on each side of the server to release the server from the rack. If necessary, loosen the rack screws.
  2. Extend the server on the rack rails until the server rail-release latches engage.

    Extending the server from the rack

  3. After performing the installation or maintenance procedure, slide the server into the rack by pressing the server rail-release latches.

    Installing the server in the rack