Previous Topic

Next Topic

Remove the server from the rack

WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack.

WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

32.18-52.87 kg

70.94-116.56 lb

This symbol indicates that the component exceeds the recommended weight for one individual to handle safely.

WARNING:  To reduce the risk of personal injury or damage to the equipment, observe local occupational health and safety requirements and guidelines for manual material handling.

To remove the server from the rack:

  1. Pull down the quick-release levers on each side of the server to release the server from the rack. If necessary, loosen the rack screws.
  2. Extend the server on the rack rails until the server rail-release latches engage.

    Extending the server from the rack

  3. Remove the server from the rack.