Expansion board
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all expansion slots have either an expansion slot cover or an expansion board installed. |
To remove the component:
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Extend the server from the rack.
- Remove the access panel.
- Open the expansion board retainer.
- Disconnect any cables attached to the expansion board.
- Remove the retaining screw, if installed.
- Remove the expansion board.
To replace the component, reverse the removal procedure.