FBWC module and capacitor pack option

CAUTION: The cache module connector does not use the industry-standard DDR3 mini-DIMMs. Do not use the controller with cache modules designed for other controller models, because the controller can malfunction and you can lose data. Also, do not transfer this cache module to an unsupported controller model, because you can lose data.

To install the component:

1. Back up all data.
2. Close all applications.
3. Power down the server.
4. Remove all power:
   1. Disconnect each power cord from the power source.
   2. Disconnect each power cord from the server.

      CAUTION: In systems that use external data storage, be sure that the server is the first unit to be powered down and the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the drives as failed when the server is powered up.

5. Extend the server from the rack.
6. Remove the access panel.
7. Remove the SPI board.
8. Install the cache module.

   

9. Connect the cable.

   

10. Install the capacitor pack.

    

11. Install the SPI board.
12. Install the access panel.
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.