Dedicated iLO management module option
To install the component:
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Place the server on its side.
- Remove the access panel.
- If installed, remove the PCI air baffle.
- Remove the system air baffle.
- Open the slot cover retainer and remove the PCIe blank.
- Install the dedicated iLO management port module and close the slot cover.
- Install the system air baffle.
- If removed, install the PCI air baffle.
- Install the access panel.
- Return the server to an upright position.
- Connect each power cord to the server.
- Connect each power cord to the power source.
- Power up the server.