Front panel LEDs and buttons

Item Description Status
1

UID button/LED [1]

Solid blue = Activated

Flashing blue:

  • 1 flash per second = Remote management or firmware upgrade in progress
  • 4 flashes per second = iLO manual soft reboot sequence initiated
  • 8 flashes per second = iLO manual hard reboot sequence in progress

    Off = Deactivated

2

Power On/Standby button and system power LED 1

Solid green = System on

Flashing green (1 flash per second) = Performing power on sequence

Solid amber = System in standby

Off = No power present [2]

3

NIC status LED 1

Solid green = Link to network

Flashing green (1 flash per second) = Network active

Off = No network activity

4

Health LED 1

Solid green = Normal

Flashing green (1 flash per second) = iLO is rebooting

Flashing amber = System degraded [3]

Flashing red = System critical 3

[1] When the LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see "'Power Fault LEDs.'''
[2] Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occured, or the power button cable is disconnected.
[3] If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status. For more information, see "'Integrated Management Log."'