Remove the processor air baffle

1. Power down the server.
2. Disconnect all peripheral cables from the server.
3. Remove the server.
4. Place the server on a flat, level work surface.
5. Disconnect the intra-tray signal cable from the power expander board.

   

6. Remove all drives from drive cage assembly 2.
7. Remove drive cage assembly 2.
8. Disconnect and remove the drive cables connected to drive cage assembly 2.
9. Remove the rear accelerator cage.
10. Remove the front accelerator cage.
11. Disconnect all accelerator cables from the power expander board.
12. Remove the upper server tray.
13. Remove the processor air baffle.