Dual FlexibleLOM riser options
To install the component:
- Power down the server associated with the I/O module.
- Remove the server associated with the I/O module.
- If an I/O module blank is not installed in the associated even-numbered I/O module bay, install an I/O module blank in the associated even-numbered bay.
- Remove the I/O module.
- Remove the support arm from the I/O module.
- Using a T-10 Torx screwdriver, install the I/O module FlexibleLOM adapter and the support arm.
- Install the I/O module.
- Install the server into the chassis.
- Connect all peripheral cables to the server.
- Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes from amber to green.