Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
-
Power down the server.
-
Disconnect the power cord from the AC source.
-
Remove the power adapter cord from the power cord clip, and then disconnect the power adapter from the server.
-
Disconnect all peripheral cables from the server.
-
If installed, unlock and remove the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
-
If the server is in a vertical orientation, position the server in a horizontal orientation.
-
Remove the front bezel.
-
Remove the LFF drive:
- Press the drive latch (callout 1).
- Slide the drive out of the drive bay (callout 2).
- Remove the screws from the drive and retain the screws for use in the replacement drive.
To replace the component, reverse the removal procedure.