Previous Topic

Next Topic

Installing a Smart Storage Battery

To install the component:

  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Place the server on its side.
  4. Remove the access panel.
  5. If installed, remove the PCI air baffle.
  6. Remove the system air baffle.
  7. Install Smart Storage Battery holder if not installed.
  8. Install the Smart Storage Battery, and then connect the battery cable to the system board connector.

    Installing the HP Smart Storage Battery

  9. Install the system air baffle.
  10. If removed, install the PCI air baffle.
  11. Install the access panel.
  12. Return the server to an upright position.
  13. Connect each power cord to the server.
  14. Connect each power cord to the power source.
  15. Power up the server.