Install the air baffle

CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.

To install the component:

Procedure

  1. Install the air baffle.
    Installing the air baffle
  2. Install the access panel.
  3. Do one of the following:
    • If the server is in a tower configuration, return the server to an upright position.
    • If the server is in a rack configuration, slide the server into the rack.
  4. Connect each power cord to the server .
  5. Connect each power cord to the power source.
  6. Power up the server.
  7. Do one of the following:

Results